ELECTRIC TRIM TAB KITS 17 lencomarine.com = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. 14"(35.6 cm) 6"(15.2 cm) 10" (25.4 cm) 8" (20.3 cm) 2" (5.1 cm) Blades are constructed of Electro-Polished 7-gauge (4.6 mm) laser cut 304 stainless steel, heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8" (9.5 mm) stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed. Kits include: • (2) 7-gauge stainless steel Electro-Polished blades • (4) 15056-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors • Lenco owner's/installation manual • Note: Boat-mounting hardware to be supplied by the customer • Note: Actuator extension harnesses not in kits, must be purchased separately (4 required) See page 42 High Performance (HP) Trim Tab Kits 12V System / Dual Actuator Same powerful features and unique blade design as the single HP series with double the actuator support for larger, faster boats. Boat lengths 24' (7.3 m) to 52' (15.8 m) 15051-101 Electro-Polished SHIPPED FULLY ASSEMBLED Part # L" X W" Boat Length Min. Transom Height 15050-101 21" x 14" 24'–42' 10.5" (26.7 cm) 15051-101 25" x 14" 28'–46' 10.5" (26.7 cm) 15068-101 29" x 14" 30'–52' 10.5" (26.7 cm) The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates. Back Plate Dimensions = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. Blades constructed of 7-gauge (4.6 mm) laser cut 304 stainless steel with 3/8" (9.5 mm) diameter hinge pin. High impact corrosion proof upper and lower mounting brackets with mechanical gland cable seal, 5/16" (.8 cm) upper and lower stainless steel mounting bolts. Also includes (2) 3.75" (9.5 cm) sacrificial anodes installed. Kits include: • (2) 7-gauge stainless steel blades with standard finish • (2) Standard actuators with 6' (1.8 m) lead and Deutsch connectors • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets • Lenco owner's/installation manual • Stainless steel mounting hardware • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required) See page 42 Hybrid Trim Tab Kits 12V & 24V Systems/ Single Actuator Engineered to combine the benefits and features of our Limited Space and Super Strong series. This ultra-compact design utilizes a greater deflection angle creating substantial lift with less surface area. Boat lengths 30' (9.1 m) to 60' (18.3 m) Part # Voltage L" X W" Boat Length 15148-101 24V 4" x 18" 30'–44' 15149-101 24V 4" x 24" 42'–52' 15150-101 24V 4" x 30" 48'–60' Switch kits sold separately See pages 30–32 Switch kits sold separately See pages 30–32 Part # Voltage L" X W" Boat Length 15145-101 12V 4" x 18" 30'–44' 15146-101 12V 4" x 24" 42'–52' 15147-101 12V 4" x 30" 48'–60' 15146-101
RkJQdWJsaXNoZXIy MjgzMDI=