130 SWITCHING & MONITORING bluesea.com M2 OLED Digital Meters The M2 Organic LED Digital Monitor measures essential electrical system parameters with adjustable alarms and an auto-dimming display. The M2 Monitors include a MOSFET External Circuit Relay (ECR) which can be used to control external circuits based on any value measured by the M2. • Auto-dimming, bright Organic LED display is easy to read • 80dB alarm on all models • Isolated 500mA MOSFET relay • Includes external DC Shunt or AC Current Transformer when required Specifications Display Size 55mm x 28mm Power Supply Voltage 7–70V DC* Range (Power Consumption) 0.3W–1.0W * Variable with voltage, display intensity,and sleep mode Regulatory Monitor face is IP66 - protected against powerful water jets when installed according to instructions M2 OLED Surface Mount Nut Finger Tighten Only! Locking ring MUST go on before mounting nut B U L K H E A D 1" MAX Panel Thickness (25mm) 2.37" (60.07mm) 0.72" (18.31mm) Mounts in a 2-1/8" (54mm) DIA Hole Gasket Seal Part# Description Width in (mm) Height in (mm) 1525 360 Blank M2 OLED Panel 4.88 (123.83) 4.75 (120.65) M2 OLED Mounting Options Flat panel mount Surface mount 1525 (meter not included) Related Products ML Series Remote Battery Switches page 70 Floyd Bell Turbo Series Alarm page 133 DC Shunts page 133 AC Current Transformer page 133 Temperature Sensors page 133 Part# Description 1810 Diesel, Water, Waste Ultrasonic Tank Sender (32" tank depth) 1811 Gasoline Ultrasonic Tank Sender (24" tank depth) System Inputs Functions DC 2 DC Voltage Battery 1, State-of-Charge, & Current DC Voltage Battery 2 AC 1 AC Voltage, Current, & Frequency Auxiliary 2 Tank 1, Tank 2 Connection Table M2 Vessel Systems Monitor (VSM) Performs comprehensive monitoring of four critical systems in one compact organic LED digital monitor DC System Monitoring (up to two batteries) One input monitors the DC voltage, state-of-charge, current for one battery bank and another input monitors the voltage of an additional battery bank. Alarms include high and low voltage, high current, and low battery. AC System Monitoring The VSM monitors a single AC voltage, current, and frequency. Alarms include high and low voltage, high current, and high and low frequency. Tank Monitoring (Auxiliary inputs may also be used to monitor bilge pumps) The VSM has two tank monitoring auxiliary inputs. Tank status can be represented in both capacity (gallons or liters) or as a percentage of capacity. Custom tank shapes can be auto-calibrated or programmed. Both high and low level alarms can be set for all tanks. Voltage Current Amp Hours Hi/LoAlarms Voltage Current Frequency Hi/LoAlarms Levels Hi/LoAlarms AC DC Tank 1 Tank 2 Levels Hi/LoAlarms Tank Senders Supported: 10–180 Ω VDO 240–33 Ω Teleflex 1810 & 1811 (sold separately) 1810 1811 1850 Ultrasonic Tank Senders
RkJQdWJsaXNoZXIy MjgzMDI=