2019 Mobile Catalog

64 BATTERY MANAGEMENT bluesea.com Mounting Options HD Series Battery Switches Up to 600 Amps continuous rating for large diesel engines • Tin-plated copper studs for maximum conductivity and corrosion resistance • Accepts up to 4/0 AWG (120 mm²) battery cables • Studs accept 1/2" (M12) ring terminals • 7/8" (22 mm) stud length accepts multiple cable terminals • Blue Sea Systems one-piece terminal stud design never loosens over time • One-piece stainless flange nuts ensure safe and secure connections • Fits most Perko and Guest low amperage battery switch hole patterns Case design allows surface or rear mounting options • Tactile indicator conveys knob position by feel Specifications 3000, 3001 3002, 3003, 11003 Cranking Rating: 30 sec. 1,750A 1,600A Cranking Rating: 1 min. 1,325A 1,150A Intermittent Rating: 5 min. 900A 700A Continuous Rating 600A 500A Voltage Max. Operating 32V DC 32V DC Regulatory Emarked, ISO 8846, UL Listed - UL 1107 electric power switches Meets American Boat and Yacht Council (ABYC) requirements Meets UL 1500 and SAE J1171 external ignition protection requirements IP66 – protected against powerful water jets (see inside back cover) * Includes Alternator Field Disconnect (AFD) which protects the diodes in the alternator in the event of the switch being switched to the OFF position while the engine is running. If the AFD is not used to protect the alternator, an LED can be connected to the AFD terminals to indicate when the battery switch is in any position but OFF. Part# Description AFD* 3000 Single Circuit ON-OFF –– 3001 Single Circuit ON-OFF Yes 3002 Selector 4 Position –– 3003 Selector 4 Position Yes 11003 Selector 3 Position Yes For the full list of specifications and operation diagrams see page 66 3.00" 76.20mm 3.85" 97.79mm 3.00" 76.20mm 3.85" 97.79mm REAR PANEL MOUNT IN 3-5/8" 92mm Ø HOLE 1.59" 40.39mm 3.097" 78.67mm 0.77" 19.56mm 3.00" .20mm 3.85" 97.79mm REAR PANEL MOUNT IN 3-5/8" 92mm Ø HOLE 1.59" 40.39mm 3.097" 78.67mm 0.77" 19.56mm