ProMariner 2023 Catalog ISOLATORS 40 Unprotected outdrives Unprotected sail drive Unprotected and premature transom & outdrive zinc loss Model ProSafeFS30 ProSafeFS60 Part # 22034 22074 Shore Cord Inlet Compatibility Single 15, 16, 20 or 30 Single 50 or Dual 15's, 16's, 20's or 30's Ratings 120/240V AC / 41A / 50 or 60 Hz 120/240V AC / 82A / 50 or 60 Hz Max Temp. 122°F (50°C) 122°F (50°C) Size 6.75"x7"x2.5" 7.25"x6.5"x3.75" Weight 3 lbs 3.7 lbs ProSafeFS Series Galvanic Isolator Protecting your Boat’s Outdrive, Props and Metal Fittings while Maximizing Zinc Life... The ProSafeFS Series of FailSafe 30A and 60A Galvanic Isolators will interrupt galvanic current flow with other boats at a marina when installed on a boat which is connected to AC shore power. This technology maintains AC safety ground and solves the most common forms of corrosion and premature zinc loss within a boats bonding system. The ProSafeFS Series is UL certified to meet the parameters of the ABYC A-28 recommendation. ProSafeFS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe certified galvanic isolators. Both the ProSafe 30A and 60A models are built on robust flat pack semiconductor platforms, ensuring that in the event of a failure, the failure is safe by not compromising the ground continuity on-board when connected to AC shore power. • ABYC A-28 Compliant and Fail Safe Certified Certified by Underwriters Laboratories (UL). Ensures shore power safety ground wire is maintained through the isolator. • Flat Pack High Power Semiconductors Robust high power diodes allow the FS Series to meet the FailSafe criteria for conducting inrush currents 3,000A and 5,000A (FS30 and FS60 respectively) for the required duration period. • Innovative Design The FS60 will cool itself in the event it must conduct current insuring cooler operation in this mode. • Ignition Protected Meets ISO 8846 and either model can be mounted within an engine compartment. • Gold Plated Terminations Simply install in your on-board green safety ground wire (between your AC inlet and your AC panel) to separate your DC bonding system from your shore AC green wire. • ProSafeFS30 for 30A shore cord applications. ProSafeFS60 for (1) 50A or (2) 30A shore cord applications. • 5 Year Warranty