Lenco 2023 Catalog

2 0 2 3 WE MAKE THE BEST BOATS BETTER!

Heating Systems Pumps whalepumps.com Actuators Trim Tab System lencomarine.com AC Shore Power Marine Accessories marinco.com Batteries Power Conversion mastervolt.us Battery Chargers promariner.com Battery Management Circuit Protection Power Distribution bluesea.com Lighting Marine Accessories Water and Fuel Systems attwoodmarine.com Digital Control & Monitoring Onboard Offboard UX czone.net Wire Wire Management ancorproducts.com Trolling Motors motorguide.com Lithium Batteries Portable Power AGM Batteries relionbattery.com Metal Fabricated Hardware garelick.com Battery Management Power Distribution bepmarine.com Chartplotters Fishfinders Sonar & Radar Trolling Motors lowrance.com Chartplotters Radar Autopilots Sonar Technology simrad-yachting.com Chartplotters Displays Instruments Sensors bandg.com Marine Cartography c-map.com Your most trusted partner Navico Group is the world’s leading supplier of integrated systems and products to industries ranging from marine to recreational vehicles. We bring together the best brands, products and people to create groundbreaking innovations that reinvent the consumer experience. Our broad portfolio of the industry’s leading brands in power management, digital control & monitoring, networked devices, and marine electronics are distributed globally to a diverse aftermarket and OEM customer base. Navico Group is driven, every day, to be the world’s most trusted partner to the marine and mobile industries, and beyond. AVICO GROUP

I Company Philosophy Here at Lenco Marine, we have a passion that can’t be taught – it’s a commitment to producing quality products and providing excellent customer service that is shared by each and every member of the Lenco team. We work hard every day and are proud to deliver exciting, dependable, environmentally friendly products that will make your time on the water as enjoyable as it should be. Our dedication to quality and attention to detail give every member of the Lenco team the confidence to say, “We make the best boats better!” I Customer Service We pride ourselves on providing superior customer experiences. Our Warranty & Technical Support Team are here to handle all Customer requests directly through our factory. Troubleshooting help, part number assistance, warranty claim processing & much more are just a phone call away. We are also proud to announce, as of April 1st, 2019, we have extended our 3 year warranty coverage to 5 years for all standard trim tab applications. I Product Selection Lenco Marine is the true industry leader in the marine and boating world, manufacturing not only trim tabs but also electric actuators, hatch lifts, switches and the Auto Glide boat leveling system I Worldwide Access to Product A distribution network in multiple countries provides access to products when they are needed I Information 24-hour access to product information, selection tools, and technical articles online at lencomarine.com I Quality Our consistent commitment to producing only the highest quality products has proven to be an essential ingredient for the continued growth of the company What makes Lenco Marine different:

Products Heavy-Duty Trim Tab Kits The largest and strongest HD Trim Tab Series. Similar to our 10-gauge HD systems, this series was engineered using 7-gauge 1/4" thick stainless steel blades. While using a single actuator application, these systems perform best on larger vessels, including commercial applications, and go fast boats. Boat Lengths 24' (7.3 m) to 46' (14 m) 15162-103 Boat Length: 24' (7.3m) to 42' (12.8m) 15163-103 Boat Length: 28' (8.5m) to 46' (14m) 19

Products Heavy-Duty Trim Tab Kits This Heavy Duty system is similar to our 7-gauge system, but with a wider trailing edge profile giving it a larger surface area when making trim adjustments. The sides and back edges of this blade are bent up at 90 degrees providing added strength to the blade. This HD system is engineered for boats that need strength along with extra lift from the wider trailing edge profile. Boat Lengths 23' (7.01m) to 50' (15.24 m) 15164-103 Boat Length: 23' (7.1m) to 45' (13.7m) 15165-103 Boat Length: 25' (7.6m) to 50' (15.24m) 19

Switch & Flybridge Kits And Accessories Standard Integrated Switch 30 LED Integrated Switches 30 LED (TWO-PIECE) Switch Single 31 LED (TWO-PIECE) Switch Dual 31 Double Rocker Single w/o Pigtail 31 Double Rocker Switch Single 32 Double Rocker Switch Dual 32 Airboat Trim Tab Rocker Switch 32 Hatch Lift Rocker Switch Single 33, 39 Hatch Lift Rocker Switch Dual 33, 39 Flybridge Standard (ALL-IN-ONE) 34 Flybridge LED (ALL-IN-ONE) 34 Flybridge LED (TWO-PIECE) 34 Electric Trim Tab Kits Standard Mount Kits 10 Edge Mount Kits 11 Complete Trim Tab Kits 12 Limited Space Kits 13 Airboat Trim Tab Kit 13 Standard Performance Kits 14 Heavy Duty Performance 14 Extreme Duty Performance 15 High Performance Kits 16, 17 Super Strong Kits 18 Heavy Duty Kits 19 Trim Tab Selection Guide 21 Auto Glide System & Accessories Auto Glide Aftermarket Kits 26 with Existing NMEA 2000 Networks Auto Glide Aftermarket Kits 26 without Existing NMEA 2000 Networks Auto Glide Key Pad 26 Auto Glide Control Box 26 Control Box Harness 26 Auto Glide Adapter Cables 27 NMEA 2000 NetworkAccerssories 27 Auto Glide 2nd Station Kits 27 Auto Glide GPS & Accessories 27 Control Box Accessories 27 p. 15 p. 11 p. 10 p. 14 p. 13 p. 18 p. 17 p. 27 p. 27 p. 27 p. 27 p. 27 p. 27 p. 26, 27 p. 14 p. 12 p. 27 p. 27 p. 27 p. 27 p. 27 p. 30 p. 27 p. 26 p. 26, 27 p. 26, 27 p. 26, 27 p. 26, 27 p. 26 p. 27 p. 27 p. 30 p. 27 p. 26 p. 26, 27 p. 26 p. 26, 27 p. 32 p. 32 p. 32 p. 31 p. 34 p. 34 p. 34 p. 33 p. 33 p. 31 p. 31 Table of Contents p. 19

Actuators & Hatch lifts Trim Tab Actuator Guide 36 101 Standard Actuator 37 101 XD Actuator 37 101 XDS (Short) Actuator 37 102 Actuator 37 102 HD/XD Actuator 37 Electric Hatch Lifts 12 Volt 38 Electric Hatch Lifts 24 Volt 38 Stainless Steel bracket 39 Stainless Steel Pull Pin 39 Hatch Lift Rocker Switch (Single) 33, 39 Hatch Lift Rocker Switch (Dual) 33, 39 Replacement Parts & Trim Tab Accessories Bennett Hydraulic to Lenco Electric 40 Limited Space Replacement Blades 41 Most Common Replacement Blades 41 All Other Series Replacement Blades 41 120 Lower Mounting Bracket 42 Upper Mounting Bracket with Gland Seal 42 Standard Upper Bracket with Gland Seal 42 7 Degree Mounting Shim 42 Standard Lower Mounting Bracket 42 Compact Upper Bracket with Gland Seal 42 Hinge & Upper Bracket Screws 42 Actuator Replacement Hardware 42 101 Actuator Hardware 42 Remote Gland Seal Kit 42 3-3/4" & 1-7/8" Sacrificial Anodes 42 Deutsch Plug Kit (Pack of 5) 42 Deutsch Receptacle Kit (Pack of 5) 42 Deutsch Plug Electrical Repair Kit 42 Actuator Extension Harnesses 42 Replacement Hatch Lift Pull Pin 43 Delrin Mounting Pins 43 36" & 72" Power Pigtail for Switches 43 72" Power Pigtail for Control Box 43 Flybridge Key Pad Extension Harnesses 43 Replacement Y Connector Harness 43 HD Heavy Duty Actuator 43 p. 38 p. 42 p. 43 p. 42 p. 43 p. 43 p. 43 p. 42 p. 42 p. 42 p. 42 p. 43 p. 42 p. 42 p. 43 p. 42 p. 39 p. 39 p. 39 p. 37 p. 42 p. 42 p. 42 p. 41 p. 42 p. 42 p. 42 p. 41 p. 42 p. 41 p. 43 Index Part Number Index 45, 46, 47

Ideal for most common style boats from center console fishing boats to cuddy cabin cruisers. Boat lengths 14′ (4.3 m) to 69′ (21 m). Standard Mount Kits Designed for boat applications where a lower actuator mounting height is desirable. The world’s first Airboat specific design. The planing surface provides greater lift and less drag. Engineered to prevent the tab from digging in during hard turns resulting in a safer ride. Edge Mount Kits Airboat Kits Engineered to fit behind ladders. This unique design gives you all the benefits of a standard tab in an ultra compact design. Limited Space Kits Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco Electric Trim tabs FUEL EFFICIENT ELECTRIC POWERED 100% ELECTRIC INSTANT RESPONSE AUTO GLIDE COMPATIBLE ECO FRIENDLY PLUG & PLAY MADE IN THE USA ELECTRIC TRIM TAB KITS 10 11 13 13

This Super Strong design is for sport fishing, large cruising and commercial vessels. Super Strong Kits The Heavy Duty series is designed & built for the boats that need extra strength to support them in rougher water at higher speeds. High Performance Kits ELECTRIC TRIM TAB KITS 16 17 Heavy Duty (HD) Kits The Heavy Duty Kits are designed for the most extreme conditions. These systems come equipped with the new Heavy Duty Actuator. 19

ELECTRIC TRIM TAB KITS 10 lencomarine.com 5/8" (1.59 cm) 3/8" (.95 cm) 9" (22.86 cm) 14" (35.56 cm) max. height needed for actuator 3/4" (1.9 cm) 12" (30.48 cm) 5/8" (1.59 cm) 3/8" (.95 cm) 9" (22.86 cm) 14" (35.56 cm) max. height needed for actuator 3/4" (1.9 cm) 12" (30.48 cm) Part # L" X W" Boat Length Hinge Height Min Transom Height Retail Box 15000-101 9" x 9" 14'–18' 2" (5.1 cm) 14" (35.6 cm) Yes 15001-101 9" x 12" 16'–25' 2" (5.1 cm) 14" (35.6 cm) Yes 15002-101 9" x 18" 22'–30' 2" (5.1 cm) 14" (35.6 cm) – 15003-101 9" x 24" 26'–40' 1" (2.5 cm) 14" (35.6 cm) – 15004-101 9" x 30" 30'–50' 1" (2.5 cm) 14" (35.6 cm) – 15005-101 9" x 36" 34'–65' 1" (2.5 cm) 14" (35.6 cm) – 15007-101 12" x 12" 17'–30' 2" (5.1 cm) 14" (35.6 cm) Yes 15008-101 12" x 18" 26'–36' 2" (5.1 cm) 14" (35.6 cm) – 15009-101 12" x 24" 30'–44' 1" (2.5 cm) 14" (35.6 cm) – 15010-101 12" x 30" 34'–54' 1" (2.5 cm) 14" (35.6 cm) – 15011-101 12" x 36" 38'–69' 1" (2.5 cm) 14" (35.6 cm) – Switch kits sold separately See pages 30–32 Part # L" X W" Boat Length Hinge Height Min Transom Height Retail Box 15113-101 9" x 12" 16'–25' 2" (5.1 cm) 14" (35.6 cm) Yes 15114-101 12" x 12" 17'–30' 2" (5.1 cm) 14" (35.6 cm) Yes Electro-Polished Standard Mount Trim Tab Kits 12V System All the same features of the Standard Mount series with the addition of Electro-Polished blades. Electro-Polish adds a mirror finish and the ultimate corrosion protection. Boat lengths 16' (4.9 m) to 30' (9.1 m) 15001-101 15113-101 Blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with a 5/8" (1.6 cm) flared trailing edge & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Kits include: • (2) 12-gauge stainless steel standard finish blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets • Lenco owner’s/installation manual • Stainless steel mounting hardware = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. Blades are constructed of Electro-Polished 12-gauge (2.7 mm) laser cut 304 stainless steel with a 5/8" (1.6 cm) flared trailing edge & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Kits include: • (2) 12-gauge stainless steel ElectroPolished blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets • Lenco owner’s/installation manual • Stainless steel mounting hardware Standard Mount Retail Box See check-list below Standard Mount Retail Box See check-list below Standard Mount Trim Tab Kits 12V System The series that started the electric revolution! Our original Trim Tab design and still the most popular series we build. Ideal for most common style boats from center console fishing boats to cuddy cabin cruisers. Boat lengths 14' (4.3 m) to 69' (21 m) = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. Switch kits sold separately See pages 30–32

ELECTRIC TRIM TAB KITS 11 lencomarine.com 11" (27.94 cm) height needed for actuator in 12" (30.48 cm) tab length 13.5" (34.29 cm) height needed for actuator in 9" (22.86) tab length 12" (30.48 cm) Edge Mount Trim Tab Kits 12V System Designed for boat applications where a lower actuator mounting height is desirable. Actuator mounts at the trailing edge of the blade giving it a ½" (1.3 cm) lower mounting height on 9" (22.9 cm) long blades & 3" (7.6 cm) lower mounting height on 12" (30.5 cm) long blades. All edges are turned up for added strength and style. Boat lengths 14' (4.3 m) to 36' (11 m) Electro-Polished Edge Mount Trim Tab Kits 12V System All the same features of the Edge Mount series with the addition of Electro-Polished blades. Electro-Polish adds a mirror finish and the ultimate corrosion protection. Actuator mounts at the trailing edge of these 12" (30.5 cm) blades giving them a 3" (7.6 cm) lower mounting height. Boat Lengths 14' (4.3 m) to 30' (9.1 m) Part # L" X W" Boat Length Hinge Height Min.Transom Height Retail Box 15013-101 9" x 9" 14'–18' 2" (5.1 cm) 13.5" (34.3 cm) Yes 15014-101 9" x 12" 16'–25' 2" (5.1 cm) 13.5" (34.3 cm) Yes 15015-101 12" x 9" 14'–18' 2" (5.1 cm) 11" (27.9 cm) Yes 15016-101 12" x 12" 17'–30' 2" (5.1 cm) 11" (27.9 cm) Yes 15017-101 12" x 18" 26'–36' 2" (5.1 cm) 11" (27.9 cm) – 15016-101 15116-101 Part # L" X W" Boat Length Hinge Height Min Transom Height Retail Box 15115-101 12" x 9" 14'–18' 2" (5.1 cm) 11" (27.9 cm) Yes 15116-101 12" x 12" 17'–30' 2" (5.1 cm) 11" (27.9 cm) Yes Blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge, & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Blades are constructed of Electro-Polished 12-gauge (2.7 mm) laser cut 304 stainless steel with a 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Kits include: • (2) 12-gauge stainless steel standard finish blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets • Lenco owner’s/installation manual • Stainless steel mounting hardware Kits include: • (2) 12-gauge stainless steel Electro-Polished blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets • Lenco owner’s/installation manual • Stainless steel mounting hardware 3/4" (1.9 cm) 3/8" (.95 cm) 11" (27.94 cm) height needed for actuator in 12" (30.48 cm) tab length 12" (30.48 cm) Edge Mount Retail Box See check-list below Retail Box See check-list below Edge Mount = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. Switch kits sold separately See pages 30–32 Switch kits sold separately See pages 30–32

ELECTRIC TRIM TAB KITS 12 lencomarine.com = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. Complete Edge Mount Trim Tab Kits 12V System Everything you need in one box! The Edge Mount trim tab kit with the added benefit of having the integrated switch choice & power connector all included. Boat lengths 17' (5.2 m) to 30' (9.1 m) Blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with a 5/8" (1.6 cm) flared trailing edge & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Switch included. Kits include: • (1) Switch Kit - Choose Double Rocker, Standard Integrated or LED Integrated • (2) 12-gauge stainless steel standard finish blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets • Lenco owner’s/installation manual • Stainless steel mounting hardware Blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with a 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Switch included. Kits include: • (1) Switch Kit - Choose Double Rocker, Standard Integrated or LED Integrated • (2) 12-gauge stainless steel standard finish blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets • Lenco owner’s/installation manual • Stainless steel mounting hardware 5/8" (1.59 cm) 3/8" (.95 cm) 9" (22.86 cm) 14" (35.56 cm) max. height needed for actuator 3/4" (1.9 cm) 12" (30.48 cm) Standard Mount Retail Box Packaged with all kits shown Retail Box Packaged with all kits shown Complete Standard Trim Tab Kits 12V System Everything you need in one box! The Standard trim tab kit with the added benefit of having the integrated switch choice & power connector all included. Boat lengths 16' (4.9 m) to 30' (9.1 m) Part # L" X W" Kit Description Switch Kit Included 15101-104 9" x 12" Standard Double Rocker Switch 15104-102 9" x 12" Standard Standard Integrated Switch 15108-103 9" x 12" Standard LED Integrated Switch 15103-104 12" x 12" Standard Double Rocker Switch 15105-102 12" x 12" Standard Standard Integrated Switch 15109-103 12" x 12" Standard LED Integrated Switch Part # L" X W" Kit Description Switch Kit Included 15102-104 12" x 12" Edge Mount Double Rocker Switch 15106-102 12" x 12" Edge Mount Standard Integrated Switch 15110-103 12" x 12" Edge Mount LED Integrated Switch 3/4" (1.9 cm) 3/8" (.95 cm) 11" (27.94 cm) height needed for actuator in 12" (30.48 cm) tab length 12" (30.48 cm) Edge Mount 3 switches to choose from: Double Rocker Standard Integrated LED Integrated 3 switches to choose from: Double Rocker Standard Integrated LED Integrated

ELECTRIC TRIM TAB KITS 13 lencomarine.com LS-Limited Space Trim Tab Kits 12V System TWO STYLES TO CHOOSE FROM Engineered to fit behind ladders. This unique design gives you all the benefits of a standard tab in an ultra compact design. These kits are updated with 11-gauge stainless steel blades. Boat lengths 14' (4.3 m) to 25' (7.6 m) Blades are constructed of a stronger 11-gauge laser cut 304 stainless steel and 3/8" (9.5 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Kits include: • (2) 11-gauge stainless steel blades with option of standard finish or electro-polished finish • (2) actuators with 6' (1.8 m) lead and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • Lower mounting brackets included • Lenco owner's/installation manual • Stainless steel mounting hardware Part # L" X W" Min. Transom Height Hinge Height Actuators In Kit Blade Finish 15125-101 4" x 12" 14.5" (36.8 cm) 2" (5.1 cm) 15054-001 Standard 15126-101 4" x 12" 14.5" (36.8 cm) 2" (5.1 cm) 15054-001 ElectroPolished 15052-101 4" x 12" 13" (33 cm) 2" (5.1 cm) 15057-001 Standard 15088-101 4" x 12" 13" (33 cm) 2" (5.1 cm) 15057-001 ElectroPolished = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. 4" X 12" Tab Size 15088-101 XDS Actuator 4" X 12" Tab Size 15125-101 Standard Actuator Airboat Trim Tab Kit 12V System The world’s first Airboat specific design. The planing surface provides greater lift and less drag. Engineered to prevent the tab from digging in during hard turns resulting in a safer ride Blade is constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with a welded on stainless steel adjustable lower actuator mounting bracket & 1/8" (3.2 mm) diameter hinge pin. High impact corrosion proof upper mounting bracket with mechanical cable gland seal. Kit includes: • (1) 12-gauge stainless steel standard finish blade with 2" (5.1 cm) hinge height • (1) actuator with 6' (1.8 m) lead and Deutsch connector • (1) 30133-002 actuator extension wiring harness - 14' (4.3 m) length • (1) 15085-001 upper mounting bracket with gland seal • Lower mounting bracket included • Lenco owner's/installation manual • Stainless steel mounting hardware Part # L" X W" Actuator In Kit Description 15112-101 9" x14" 15055-001 Airboat Kit without Switch Airboat Trim Tab Switch Recommended (See page 32) Airboat Single Rocker Switch with Deutsch Receptacle. & (2) 30" (76.2 cm) NonTerminated Power Leads - Clamshell Packaged Special Airboat Switch sold separately = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. 15112-101 shown here Extended Retracted Switch kits sold separately See pages 30–32 Part # Description 15095-001 Airboat Trim Tab Switch

ELECTRIC TRIM TAB KITS 14 lencomarine.com Heavy Duty (HD) Performance Trim Tab Kits 12V System The Heavy Duty series is designed & built for the boats that need extra strength to support them in rougher water at higher speeds. Boat lengths 18' (5.5 m) to 42' (12.8 m) Blades are constructed of Electro-Polished 12-gauge (2.7 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 1/4" (6.4 mm) diameter hinge pin. Kits include: • (2) 12-gauge stainless steel Electro-Polished blades • (2) 15054-001 actuators with 6' (1.8 m) leads & Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets • Lenco owner's/installation manual • Stainless steel mounting hardware Blades are constructed of Electro-Polished 12-gauge (2.7 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 1/4" (6.4 mm) diameter hinge pin. Full transom back plate with welded on stainless steel upper & adjustable lower actuator mounting brackets, 5/16" (.8 cm) stainless steel mounting bolts & mechanical strain-relief cable seals. 3.75" (9.5 cm) sacrificial anodes installed. Kits include: • (2) 12-gauge stainless steel Electro-Polished blades • (2) 15055-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • Lenco owner's/installation manual • Note: Boat-mounting hardware to be supplied by the customer Standard Performance Trim Tab Kits 12V System Our first series designed specifically for performance. This system comes equipped with a thicker reinforced hinge and complimented with an Electro-Polished finish for added quality and protection. Boat lengths 13' (4 m) to 40' (12.2 m) 15037-101 Electro-Polished 15043-101 Electro-Polished Part # L" X W" Boat Length Hinge Height Min. Transom Height 15034-101 9" x 9" 13'–20' 2" (5.1 cm) 13.5" (34.3 cm) 15035-101 9" x 12" 16'–26' 2" (5.1 cm) 13.5" (34.3 cm) 15036-101 12" x 9" 16'–26' 2" (5.1 cm) 11" (27.9 cm) 15037-101 12" x 12" 18'–32' 2" (5.1 cm) 11" (27.9 cm) 15038-101 14" x 12" 19'–34' 2" (5.1 cm) 11" (27.9 cm) 15039-101 16" x 12" 20'–36' 2" (5.1 cm) 11" (27.9 cm) 15040-101 18" x 14" 22'–40' 2" (5.1 cm) 11" (27.9 cm) Part # L" X W" Boat Length Min. Transom Height 15041-101 12" x 12" 18'–34' 10.5" (26.7 cm) 15042-101 14" x 12" 19'–36' 10.5" (26.7 cm) 15043-101 16" x 12" 20'–38' 10.5" (26.7 cm) 15044-101 18" x 14" 22'–42' 10.5" (26.7 cm) = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. Back Plate Dimensions 10" (25.4 cm) 12"(30.5 cm) 8" (20.3 cm) 5"(12.7 cm) 2" (5.1 cm) 15041-101 15042-101 15043-101 14"(35.6 cm) 6"(15.2 cm) 10" (25.4 cm) 8" (20.3 cm) 2" (5.1 cm) 15044-101 The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates. SHIPPED FULLY ASSEMBLED = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. Switch kits sold separately See pages 30–32 Switch kits sold separately See pages 30–32

ELECTRIC TRIM TAB KITS 15 lencomarine.com Part # L" X W" Boat Length Min. Transom Height 15045-101 17" x 12" 20'–40' 10.5" (26.7 cm) Part # L" X W" Boat Length Min. Transom Height 15046-101 19" x 14" 23'–45' 10.5" (26.7 cm) 15047-101 24" x 14" 25'–50' 10.5" (26.7 cm) 14"(35.6 cm) 6"(15.2 cm) 10" (25.4 cm) 8" (20.3 cm) 2" (5.1 cm) Extreme Duty (XD) Performance Trim Tab Kit 12V System / Single Actuator The only single actuator Extreme Duty design offered. This kit is similar to our Heavy Duty Performance series with a thicker, stronger blade for those boaters who run hard in extreme conditions. Boat lengths 20' (6.1 m) to 40' (12.2 m) Extreme Duty (XD) Performance Trim Tab Kit 12V System / Dual Actuator All the robust features of our single actuator XD series with twice the actuator power for larger, faster boats that don't back away from rough conditions. Boat lengths 23' (7 m) to 50' (15.2 m) Blades are constructed of Electro-Polished 10-gauge (3.4 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8" (9.5 mm) stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed. Blades are constructed of Electro-Polished 10-gauge (3.4 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8" (9.5 mm) stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed. Kit includes: • (2) 10-gauge stainless steel Electro-Polished blades • (2) 15056-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors • Lenco owner's/installation manual • Note: Boat-mounting hardware to be supplied by the customer • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required) See page 42 Kits include: • (2) 10-gauge stainless steel Electro-Polished blades • (4) 15056-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors • Lenco owner's/installation manual • Note: Boat-mounting hardware to be supplied by the customer • Note: Actuator extension harnesses not in kits, must be purchased separately (4 required) See page 42 15045-101 Electro-Polished 15046-101 Electro-Polished Back Plate Dimensions 10" (25.4 cm) 12"(30.5 cm) 8" (20.3 cm) 5"(12.7 cm) 2" (5.1 cm) Back Plate Dimensions The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates. The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates. SHIPPED FULLY ASSEMBLED SHIPPED FULLY ASSEMBLED = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. Switch kits sold separately See pages 30–32 Switch kits sold separately See pages 30–32

ELECTRIC TRIM TAB KITS 16 lencomarine.com = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. Blades are constructed of Electro-Polished 7-gauge (4.6 mm) laser cut 304 stainless steel with heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8" (9.5 mm) stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed. Kits include: • (2) 7-gauge stainless steel Electro-Polished blades • (2) 15056-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors • Lenco owner's/installation manual • Note: Boat-mounting hardware to be supplied by the customer • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required) See page 42 High Performance (HP) Trim Tab Kits 12V System / Single Actuator This powerful, unique series is designed for multiple engine applications with limited transom space. The contoured blade design allows for extra space for engines to turn as well as decreasing and preventing cavitation to the props. Boat lengths 16' (4.9 m) to 40' (12.2 m) 15049-101 Electro-Polished Part # L" X W" Boat Length Min. Transom Height 15048-101 14" x 12" 16'–32' 10.5" (26.7 cm) 15049-101 18" x 12" 20'–40' 10.5" (26.7 cm) The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates. 10" (25.4 cm) 12"(30.5 cm) 8" (20.3 cm) 5"(12.7 cm) 2" (5.1 cm) Back Plate Dimensions Benefits of electro-polishing • Removes iron and potential contaminants from the surface of our trim tabs. • Removes a small amount of material from the surface of our trim tab blades, also removing small burrs. • Enhances the chromium and nickel content providing added resistance against environmental factors such as air, fresh and salt water. • Polishes areas inaccessible by any other polishing methods. • Provides a clean and smooth surface that is aesthetically pleasing. Electro-Polishing is a process that improves the surface finish of our 304 stainless steel trim tab blades. Electro-Polishing delivers a smoother, more reflective surface than our standard mill finish and improves surface cleanability. Electro-Polishing dissolves free iron, inclusions, and embedded particles from the surface of our trim tabs. Lenco’s in-house process improves the near-surface chemistry of the material, and promotes the formation of an improved corrosion resistant surface layer. What is Electro-Polishing? Surface Contaminants Chromium & Nickel Steel C Surface Contaminants Chromium & Nickel Steel A Surface Contaminants Chromium & Nickel Steel Surface Contaminants Chromium & Nickel Steel B The raw form of all stainless steel has a mixture of unwanted surface contaminants such as iron and much needed elements such as chromium & nickel. An electrical charge is added in order to remove unwanted surface contaminants and concentrate the chromium & nickel at the surface. What is left is a stainless steel that has become much more impervious to the environment with an aesthetically pleasing “BLING” appeal. SHIPPED FULLY ASSEMBLED Switch kits sold separately See pages 30–32 TECH TIP

ELECTRIC TRIM TAB KITS 17 lencomarine.com = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. 14"(35.6 cm) 6"(15.2 cm) 10" (25.4 cm) 8" (20.3 cm) 2" (5.1 cm) Blades are constructed of Electro-Polished 7-gauge (4.6 mm) laser cut 304 stainless steel, heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8" (9.5 mm) stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed. Kits include: • (2) 7-gauge stainless steel Electro-Polished blades • (4) 15056-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors • Lenco owner's/installation manual • Note: Boat-mounting hardware to be supplied by the customer • Note: Actuator extension harnesses not in kits, must be purchased separately (4 required) See page 42 High Performance (HP) Trim Tab Kits 12V System / Dual Actuator Same powerful features and unique blade design as the single HP series with double the actuator support for larger, faster boats. Boat lengths 24' (7.3 m) to 52' (15.8 m) 15051-101 Electro-Polished SHIPPED FULLY ASSEMBLED Part # L" X W" Boat Length Min. Transom Height 15050-101 21" x 14" 24'–42' 10.5" (26.7 cm) 15051-101 25" x 14" 28'–46' 10.5" (26.7 cm) 15068-101 29" x 14" 30'–52' 10.5" (26.7 cm) The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates. Back Plate Dimensions = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. Blades constructed of 7-gauge (4.6 mm) laser cut 304 stainless steel with 3/8" (9.5 mm) diameter hinge pin. High impact corrosion proof upper and lower mounting brackets with mechanical gland cable seal, 5/16" (.8 cm) upper and lower stainless steel mounting bolts. Also includes (2) 3.75" (9.5 cm) sacrificial anodes installed. Kits include: • (2) 7-gauge stainless steel blades with standard finish • (2) Standard actuators with 6' (1.8 m) lead and Deutsch connectors • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets • Lenco owner's/installation manual • Stainless steel mounting hardware • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required) See page 42 Hybrid Trim Tab Kits 12V & 24V Systems/ Single Actuator Engineered to combine the benefits and features of our Limited Space and Super Strong series. This ultra-compact design utilizes a greater deflection angle creating substantial lift with less surface area. Boat lengths 30' (9.1 m) to 60' (18.3 m) Part # Voltage L" X W" Boat Length 15148-101 24V 4" x 18" 30'–44' 15149-101 24V 4" x 24" 42'–52' 15150-101 24V 4" x 30" 48'–60' Switch kits sold separately See pages 30–32 Switch kits sold separately See pages 30–32 Part # Voltage L" X W" Boat Length 15145-101 12V 4" x 18" 30'–44' 15146-101 12V 4" x 24" 42'–52' 15147-101 12V 4" x 30" 48'–60' 15146-101

ELECTRIC TRIM TAB KITS 18 lencomarine.com = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. Part # Voltage L" X W" Boat Length 15018-101 12V 12" x 18" 24' – 40' 15019-101 12V 12" x 24" 27' – 44' 15020-101 12V 12" x 30" 30' – 48' 15021-101 12V 12" x 36" 33' – 52' Part # Voltage L" X W" Boat Length 15022-101 12V 16" x 24" 35' – 50' 15023-101 12V 16" x 30" 40' – 60' 15024-101 12V 16" x 36" 45' – 70' 15025-101 12V 16" x 42" 50' – 80' = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. Super Strong Trim Tab Kits 12V & 24V Systems/ Single Actuator This Super Strong design is for sport fishing, large cruising and commercial vessels. This series has a completely flat blade design which reduces spray giving you a clean, dry ride. Boat lengths 24' (7.3 m) to 52' (15.8 m) Super Strong Trim Tab Kits 12V & 24V Systems/ Dual Actuator Offering the same features as our single system, this series gives you a longer blade design with dual actuator support for those large vessels needing that extra lift. Boat lengths 35' (10.6 m) to 80' (24.4 m) Blades are constructed of 7-gauge (4.6 mm) laser cut 304 stainless steel with 3/8" (9.5 mm) diameter hinge pin. High impact corrosion proof upper and lower mounting brackets with mechanical gland cable seal, 5/16" (.8 cm) upper and 3/8" (9.5 mm) lower stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed. Blades are constructed of 7-gauge (4.6 mm) laser cut 304 stainless steel with 3/8" (9.5 mm) diameter hinge pin. High impact corrosion proof upper and lower mounting brackets with mechanical gland cable seal, 5/16" (.8 cm) upper and 3/8" (9.5 mm) lower stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed. Kits include: • (2) 7-gauge stainless steel standard finish blades • (2) 15055-001 12 Volt (15062-001 for 24 Volt) XD Extreme Duty actuators with 6' (1.8 m) & Deutsch connectors • (2) 15140-001 120 Lower Mounting Brackets • Lenco owner's/installation manual • Stainless steel mounting hardware • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required) See page 42 Kits include: • (2) 7-gauge stainless steel standard finish blades • (4) 15055-001 12 Volt (15062-001 for 24 Volt) XD Extreme Duty actuators with 6' (1.8 m) & Deutsch connectors • (4) 15140-001 120 Lower Mounting Brackets • Lenco owner's/installation manual • Stainless steel mounting hardware • Note: Actuator extension harnesses not in kits, must be purchased separately (4 required) See page 42 15018-101 15022-101 Switch kits & Harnesses sold separately Switches on pages 30–32 Harnesses on page 42 Switch kits & Harnesses sold separately Switches on pages 30–32 Harnesses on page 42 Part # Voltage L" X W" Boat Length 15026-101 24V 12" x 18" 24' – 40' 15027-101 24V 12" x 24" 27' – 44' 15028-101 24V 12" x 30" 30' – 48' 15029-101 24V 12" x 36" 33' – 52' Part # Voltage L" X W" Boat Length 15030-101 24V 16" x 24" 35' – 50' 15031-101 24V 16" x 30" 40' – 60' 15032-101 24V 16" x 36" 45' – 70' 15033-101 24V 16" x 42" 50' – 80'

ELECTRIC TRIM TAB KITS 19 lencomarine.com Part # L" X W" Boat Length Min Transom Height 15162-103 21" x 14" 24' – 42' 10.5" (26.7 cm) 15163-103 25" x 14" 28' – 46' 10.5" (26.7 cm) Heavy Duty Trim Tab Kit 12V System The largest and strongest HD Trim Tab Series. Similar to our 10-gauge HD systems, this series was engineered using 7-gauge 1/4" thick stainless steel blades. While using a single actuator application, these systems perform best on larger vessels, including commercial applications, and go fast boats. Boat Lengths 24' (7.3 m) to 46' (14m) Blades are constructed of Electro-Polished 7-gauge (4.6 mm) laser cut 304 stainless steel, heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with remote gland-seal, welded on stainless steel upper and a single adjustable lower C-channel bracket. 3/8" (9.5 mm) stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed. Kits include: • (1) Key Pad Assembly Indicator 30343-001 • (1) Switch Control Box Indicator 30368-001 • (2) 7-gauge stainless steel Electro-Polished blades • (2) Heavy Duty Actuators 15158-001 • (1) Lenco owner’s/installation manual • Note: Boat-mounting hardware to be supplied by customer • Note: Actuator extension harnesses not in kits, must be purchased separately (2) required See page 42 Two Piece indicator switch included with kit 15162-103 Electro-Polished SHIPPED FULLY ASSEMBLED 14"(35.6 cm) 6"(15.2 cm) 10" (25.4 cm) 8" (20.3 cm) 2" (5.1 cm) Back Plate Dimensions = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. Heavy Duty Trim Tab Kit 12V System This Heavy Duty system is similar to our 7-gauge system, but with a wider trailing edge profile giving it a larger surface area when making trim adjustments. The sides and back edges of this blade are bent up at 90 degrees providing added strength to the blade. This HD system is engineered for boats that need strength along with extra lift from the wider trailing edge profile. Boat lengths 23’ (7.01m) to 50’ (15.24m) Blades are constructed of Electro-Polished 10-gauge (3.4 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with remote gland-seal, welded on stainless steel adjustable C-channel with 3/8" (9.5 mm) stainless steel mounting hardware and a 3.75" (9.5 cm) sacrificial anodes installed Kits include: • (1) Key Pad Assembly Indicator 3034-001 • (1) Control Box Assembly Indicator 30368-001 • (2) 10-gauge stainless steel electro-polished blades • (2) 15158-001 Heavy Duty actuators with 6’ (1.8 m) leads & Deutsch connectors • (1) Lenco owner’s/installation manual • Note: Boat-mounting hardware to be supplied by the customer • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required) see page 42 15165-103 Electro-Polished Back Plate Dimensions 10" (25.4 cm) 12"(30.5 cm) 8" (20.3 cm) 5"(12.7 cm) 2" (5.1 cm) = Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below. Part # L" X W" Boat Length Min Transom Height 15164-103 19" x 14" 23' – 45' 10.5" (26.7 cm) 15165-103 24" x 14" 25' – 50' 10.5" (26.7 cm) Two Piece indicator switch included with kit SHIPPED FULLY ASSEMBLED

ELECTRIC TRIM TAB KITS 20 lencomarine.com Standard Trim Tab Boat Diagram 12 Volt / Single Actuator This is an example of a typical installation of a new trim tab kit. The diagram reveals Lenco's easy installation process of the Standard Trim Tab Kit with single actuator and the Integrated (ALL-IN-ONE) LED Tactile Switch. Everything you see in this diagram can be bought together in our Complete Standard Trim Tab Kit seen on page 12. Circuit breaker or fuse 20A@12V 10A@24V Starboard side (Green striped wires) 12V or 24V power source Orange wire must connect to ON/OFF power source Port side (Red striped wires) Key switch or ON/OFF 12 or 24 Volt power source 6' (1.8 m) actuator wire leads and Deutsch connectors For complete installation instructions please see our owners manual or visit our troubleshooting page at lencomarine.com Lenco's switch technology improves accuracy & integrates control box functionality into the key pad bezel. 20' Deutsch Connected Actuator Extension Harnesses work with any of our trim tab system kits (14 Awg wires). Our original Standard Trim Tab kit comes with two actuators with 6' leads, Deutsch connectors, blades and hardware. These 36" Power Pigtails work with any of our single actuator trim tab system kits (14 Awg wires with DTP Plug). Power Pigtail Integrated Switch Actuator Extension Harnesses Standard Trim Tab Kit Package contents for a Standard Trim Tab Retail Kit 1 2 3 4 1 2 3 4

LENCO TRIM TAB SELECTION GUIDE 3 EASY STEPS TO FIND YOUR TRIM TAB SYSTEM KIT WE MAKE THE BEST BOATS BETTER! For additional trim tab information visit us at lencomarine.com step 2 Choose the appropriate overall length of your motor boat. step 3 Choose your desired trim tab L" x W" from the available choices. step 1 Choose the appropriate minimum transom height of your motor boat. All boat configurations are different. Using this selection guide, choose the largest trim tab that fits your particular boat. For additional information visit lencomarine.com

AUTO GLIDE KITS 22 lencomarine.com Auto Glide Automatic Boat Leveling System Auto Glide provides handsfree, automatic trim control, enhanced performance & increased fuel efficiency. Auto Glide Replacement Parts Auto Glide NMEA 2000 Network Accessories Our wide variety of Auto Glide Adapter Cables allow for customizable system installations. We have a large selection of replacements parts available for the Auto Glide Boat Leveling System. Auto Glide Adapter Cables NEMA 2000 Network accessories are available to allow for installation on vessels with or without an existing NEMA 2000 network. Auto Glide Pitch Correction Auto Glide Roll Correction 100% COMPATIBLE ECO FRIENDLY PLUG & PLAY GPS TECHNOLOGY FUEL EFFICIENT PRODUCT CERTIFIED The Lenco Auto Glide helps take your mind off of balancing your boat and back to enjoying your time on the water. Your budget will be balanced as well with the world’s best fuel efficiency features. Balance your time, your boat and your budget with the Lenco Auto Glide Boat Leveling System. Automatic Boat Leveling System MADE IN THE USA AUTO GLIDE KITS 24 26 27 27

AUTO GLIDE KITS 23 lencomarine.com Auto Glide GPS & Accessories Auto Glide 2nd Station Kits Auto Glide Control Box Accessories Auto Glide second station kits allow for complete operation of your system from multiple locations on your vessel. Stand-alone GPS installation or integration with your current NEMA 2000 network are both options with our full line of NEMA 2000 network components. Auto Glide control box accessories make installation simple, even in difficult mounting locations. AUTO GLIDE KITS 27 27 27

AUTO GLIDE KITS 24 lencomarine.com 0.2 MPG 0.4 MPG 0.6 MPG 0.8 MPG 1.0 MPG 53% 36% 30% 8% WITH AUTO GLIDE WITH AUTO GLIDE WITH AUTO GLIDE WITH AUTO GLIDE NO AUTO GLIDE NO AUTO GLIDE NO AUTO GLIDE NO AUTO GLIDE 2500 RPM 2750 RPM 3000 RPM 3250 RPM What is Auto Glide Auto Glide is an automatic boat leveling system that uses sophisticated accelerometers, gyroscopes, and advanced software to optimize the performance of the vessel. Auto Glide keeps the boat level at all times regardless of cruising speeds. It has the ability to utilize GPS data and engine data to make the vessel run at the most efficient running angle. The proper use of trim tabs makes a tremendous difference in boat performance. We have developed Auto Glide to maximize the benefits of trim tabs while simplifying operation and control. Auto Glide is constantly working to make your boat the best it can be - offering a softer, smoother and more comfortable ride. Intuitive design and control Auto Glide operation is simple and intuitive. The integrated keypad provides automatic or manual control of the trim tabs. Favorite settings can be programmed and saved based on user preference. Auto Glide can connect to the NMEA 2000 network, so trim tab position can be displayed on a NMEA 2000 multi-function screen. In addition, Auto Glide has built in diagnostics. In the event of a system issue, the keypad LED lights will flash indicating an error code. Fuel efficiency at its best Auto Glide uses data it receives 25 times a second to monitor changes in the GPS speed and engine RPM to automatically put your boat in its most fuel efficient cruising position. BOAT LEVELING SYSTEM “All of the system adjustments achieve two very important objectives. One of course is fuel economy but the more important one to us is a more stable and comfortable ride particularly in rough seas.” Bill Hayward Cruisers Yacht 48' Hands Free Trim Tab Control for the Best Ride on the Water Auto Glide is the most advanced automatic trim tab control system ever developed for the marine industry. First introduced in 2009 by Lenco Marine, Auto Glide has the sophisticated features to optimize the performance of your boat. Auto Glide™ Boat Leveling System Enhance boat performance with Auto Glide Auto Glide improves the performance of the boat, and optimizes the ride in any conditions. Some of the benefits of Auto Glide are: • Automatic pitch and roll corrections. • Automatically trims boat to the most fuel efficient position. • Takes the trim tab operation out of the hands of the operator while allowing for manual override at the touch of a button. • Reduces time to plane. • Does not adjust during turns, allowing boat to roll naturally. • Safety - Minimizes bow rise and improves boat’s hole shot performance. • Built-in automatic trim tab retraction. • Waterproof key pad and control box. • Three custom settings: “Hold” mode and (2) “Favorite” modes. • Increase in fuel savings. • Can be installed on any boat with Lenco electric actuators. • Fast and easy installation. The Lenco Auto Glide helps take your mind off of balancing your boat and back to enjoying your time on the water. Your budget will be balanced as well with the world’s best fuel efficiency features. Balance your time, your boat and your budget with the Lenco Auto Glide Boat Leveling System. Fuel saving results are based on Cruisers Yachts 48 Cantius with a Volvo D6, 600 IPS, EVC, 435 horsepower engine. Results may vary depending on boat type & engine configuration.

AUTO GLIDE KITS 25 lencomarine.com Auto Glide Key Pad Upper Station 30254-002D Can Extension 30260-00X Splitter 30258-001D Auto Glide Control Box 30255-001 Auto Glide Control Box Harness Single Actuator/Tab 30248-001 DTP Power Harnesses 30140-X0XD Actuator Extention Harnesses 30133-X0XD Adapter Cable CAN 1 NMEA 30259-001D Auto Glide Key Pad Lower Station 30254-001D 1 2 3 4 5 6 7 8 9 20 Amp Fuse/Breaker Main power must be connected to battery switch or properly rated ON/OFF switch Connect CAN 1 to vessel’s existing NMEA 2000 GPS and Engine information. The Auto Glide controller requires this information to function. Trim tab position is broadcast with most systems. CanBus #2 Keypad and GPS Data (4ft) BOAT’S EXISTING NMEA NETWORK GPS Display 12V Antenna Battery Actuators and Trim Tabs 1 2 3 4 5 6 7 8 9 Auto Glide Boat Diagram

AUTO GLIDE KITS 26 lencomarine.com Part # Description of Contents 15500-101 (Qty. in kit) 15501-101 (Qty. in kit) 15504-101 (Qty. in kit) 15505-101 (Qty. in kit) 30254-001D Auto Glide Key Pad Control 1 1 1 1 30255-001 Auto Glide Control Box - For Single Actuator Trim Tab System 1 N/A 1 N/A 30256-001 Auto Glide Control Box - For Dual Actuator Trim Tab System N/A 1 N/A 1 30248-001 Auto Glide Control Box Harness - For Single Actuator Trim Tab System 1 N/A 1 N/A 30247-001 Auto Glide Control Box Harness - For Dual Actuator Trim Tab System N/A 1 N/A 1 30259-001D CAN bus # 1 NMEA 2000 CABLE - 2.5' (76.2 cm) 1 1 1 1 30262-001D CAN bus # 2 GPS / NMEA 2000 Network Adapter Cable Assembly - 2.5' (76.2 cm) 1 1 N/A N/A 30266-001 NMEA 2000 (16 CH) GPS Antenna Only 1 1 N/A N/A 30267-001D Tee Connector Only 3 3 N/A N/A 30268-001D Terminating Resistor - Female - 120 ohm 2 2 N/A N/A 30268-002D Terminating Resistor - Male - 120 ohm 1 1 N/A N/A 30281-001D Power Cable - NMEA 2000 Network - 2.5' (76.2 cm) 1 1 N/A N/A 30140-001D Single Actuator Power Pigtail 1 N/A 1 N/A 10249-001 Dual Actuator Power Pigtail N/A 1 N/A 1 30254-001D Retail Box 30267-001D 30268-001D 30268-002D 30281-001D 30262-001D 30266-001 30140-001D 10249-001 Auto Glide Aftermarket Kits for Boats with Existing NMEA 2000 Networks (Does not Include GPS Antenna & NMEA 2000 Network) Replacement Parts 15504-101 Kit Without GPS Antenna or Network - For Single Actuator Trim Tab Systems 15505-101 Kit Without GPS Antenna or Network - For Dual Actuator Trim Tab Systems 15500-101 Kit With GPS Antenna or Network - For Single Actuator Trim Tab Systems 15501-101 Kit With GPS Antenna or Network - For Dual Actuator Trim Tab Systems Auto Glide Aftermarket Kits For Boats without Existing NMEA 2000 Networks (Includes GPS Antenna & NMEA 2000 Network) Auto Glide Contents & Replacement Comparison Chart 30255-001 30256-001 30259-001D 30248-001 30247-001 Auto Glide™ Aftermarket Kit Contents

RkJQdWJsaXNoZXIy MjgzMDI=