2018 Mobile Solutions Catalog

29 AC & DC POWER CONNECTIONS bluesea.com DeckHand ™ Dimmers Digitally controls dimming of non-regulated LED, incandescent, and halogen lights • Illuminated exit with adjustable time delay • Supports multiple switch locations • Memory for last dimmer setting • Bulb saver prevents bulb aging while batteries are being charged • Provides continuous voltage control from 0 to 100% of input voltage • Offset mounting tabs allow dimmers to be mounted close together • Retail package includes momentary (ON)-OFF-(ON) switch 8216 Specifications Maximum Parasitic Current <2mA Temperature Rating -40°C to 85°C Regulatory E marked Meets ISO 8846 and SAE J1171 external ignition protection requirements Part # Amps Volts Operating Range Width in (mm) Height in (mm) Depth in (mm) 7506 6A 12V DC 9V–16V 3.23 (82.0) 3.47 (88.1) 1.30 (33.0) 7504 6A 24V DC 18V–32V 3.23 (82.0) 3.47 (88.1) 1.30 (33.0) 7507 12A 12V DC 9V–16V 3.23 (82.0) 3.47 (88.1) 1.30 (33.0) 7509 12A 24V DC 18V–32V 3.23 (82.0) 3.47 (88.1) 1.30 (33.0) 7508 25A 12V DC 9V–16V 3.23 (82.0) 3.47 (88.1) 1.30 (33.0) 7508 SPDT (ON)-OFF-(ON) Down Input (gray) +V DC (red) Up Input (white) Ground (black) Ground (black) Lamp (blue) Brightness Control (ON)-OFF-(ON) Switch Negative Bus Bar Ground (black) Up Position for Bright Down Position for Dim ( ) =momentary Optional Light Switch Fuse Illuminated Exit Using the illuminated exit feature: One minute delay: Hold the switch in up position for 2 seconds, lights will flash. Release switch after first flash and the lights will remain on for 1 minute. Two to five minute delay: Hold the switch in up position for 1–4 seconds after the first flash. Release the switch after 2 to 5 flashes. The lights will remain on for 1 minute for each flash up to a maximum of 5 minutes. 1.79" (45.5 mm) Mounting holes for #8 or M4 hardware 2.86" (68.0 mm) 3.47" (88.1 mm) 11.0" ± .25" (279.4 mm ± 6.4 mm) 3.23" (82.0 mm) 1.30" (33.0 mm) Example of nested DeckHand Dimmers

RkJQdWJsaXNoZXIy MjgzMDI=