We connect and protect Full Line Product Catalog nVent.com/GardnerBender
nVent.com/GardnerBender | 1 Starting with just a single product in 1959, our nVent GARDNER BENDER business has grown to include over 3000 products and 11 distinct product lines that install, connect, fasten, test, and trouble-shoot electrical wire and circuits. From large wire pulling equipment and powered conduit benders to wire connectors, heat shrink, cable ties, hand tools and test instruments, nVent GARDNER BENDER provides a complete solution for electrical installation and maintenance projects large and small. nVent GARDNER BENDER products are stocked on over 1.0 million square feet of shelf space at more than 15,000 locations throughout the Americas, including leading electrical, industrial and catalog distributors, as well as leading home centers, hardware stores and e-commerce sites. Known for award-winning innovation, operational excellence, category analytics, and leading merchandising support, nVent GARDNER BENDER has been recognized multiple times by leading customers as “Supplier of the Year and Product of the Year”. Looking towards the future, nVent GARDNER BENDER continues to build on these recent successes, evolving and innovating to exceed the ever-changing technological requirements of our customers. For 60 years nVent GARDNER BENDER has been manufacturing and supplying a broad range of electrical and wire management products for both professionals and do-it-yourselfers. About nVent GARDNER BENDER
nVent.com/GardnerBender | 3 nVent GARDNER BENDER Portable Cyclone Powered Rigid, IMC, & EMT Conduit Bender - 76 NEW NEW NEW NEW NEW NEW NEW NEW Apprentice Tool Kit - 143 11-In-1 Screw And Nut Driver - 141 Lever Connectors - 13 nVent Gardner Bender Spike Stopper - 122 1000v Insulated Hand Tools - 139 nVent Gardner Bender Wraptor Heavy Duty Storage Strap - 63 Box Solutions Kit - 14 New Products
4 | nVent.com/GardnerBender Ballast Disconnects & In-Line Splices 14 Box Solutions Kit 14 Corrosion Inhibitors 16 Crimp Connectors 13 DataCom Connectors 17 Grounding Accessories 14 nVent GARDNER BENDER LeverGard Lever Connectors 13 Mechanical Connectors 15-16 Push-In Connectors (nVent GARDNER BENDER PushGard) 13 Twist-on Connectors 9-12 Wire Connector Bits 17 Wire Range Chart 8 CONNECTORS 6 TERMINALS & WIRE 18 Butt Splices 20-21 Bullet Splices 22 Clips & Clamps 25 Disconnects 20-22 Heat-Shrink Terminals 20 Ring Terminals 20, 23 Spade Terminals 20, 23 Tap Splices 22 Terminal Blocks 24 Terminal Kits 27-29 Underground UF Splice Kits 24 Wire 26 CABLE TIES 30 All Weather 34 Assorted 34 Heavy Duty 33 Mounting Bases 39 Plenum 35 Releasable 37 Self Cutting 35 Specialty 35-39 Standard 32 Tensioning Tools 35 STAPLES 40 Staple Application Chart 52 Datacom 45 Coax 45 Conduit Straps 46 Insulated Metal 43 Low Voltage Accessories 47 Masonry 45-46 Metal 43 MultiCable 46 nVent GARDNER BENDER Professional Grade Staples 48-51 Plastic 44 Roofing 45 Service Entrance 44 Staple Guns 47 WIRE MANAGEMENT 54 Anchor Kits 61 Box Supports 60 Butane Pocket Torch 59 Cable Clamps & Clips 65-66 nVent GARDNER BENDER Cable Wraptor 63 Duct Seal Compound 60 Electrical Reference Books 62 Fire Blocking 67-68 Hanger Strap 61 Heat-Shrink Tubing 58-59 Liquid/Spray Tape 57 Screw Kits 61 Spacers 60 Snap-In Metal Bushing 59 Split Flex Tubing/Spiral Wrap 64 Tape 56-57 Wire Marking 62 nVent GARDNER BENDER Wraptor Heavy Duty Storage Strap 63 nVent GARDNER BENDER WrapTwist Reusable Rubber Tie 59 Table of Contents
nVent.com/GardnerBender | 5 APPENDIX 156 INDEX 157 CONDUIT BENDING 70 Bending Selection Guide 73 nVent GARDNER BENDER Cyclone Electric Bender (B2000) 74-75 nVent GARDNER BENDER Portable Cyclone Powered Conduit Bender (B1000) 76-77 Hand Benders (including nVent GARDNER BENDER Big Ben) 79-80 nVent GARDNER BENDER HotBlanket PVC Benders 80 nVent GARDNER BENDER Sidewinder Electric Bender (B2555) 78 HOLEMAKING 82 35-Ton Hydraulic Punch 90 Drawstuds 88-89 Hydraulic Cylinder Specifications 92 Knockout / Snap-In Seals 91 Manual Hydraulic Pump 90 nVent GARDNER BENDER Slug-Out Hydraulic Knockout Sets 84 nVent GARDNER BENDER Slug-Out Individual Components 87 nVent GARDNER BENDER Slug-Out Sets 85-86 Step Bits 91 TEST AND MEASURE 108 Battery Testers 119 Continuity Testers 11-112 Multimeters (analog, digital, clamp-on) 116-118 Non-Contact Voltage Testers 113 Power Meter 120 Receptacle Testers/Analyzers 114 Replacement Parts and Accessories 121 nVent Gardner Bender Spike Stopper 122 USB Tester 115 Voltage Testers 110-113 HAND TOOLS 124 1000V Insulated Hand Tools 139 Apprentice Tool Kit 143 nVent GARDNER BENDER ArmorEdge 128-129 nVent GARDNER BENDER Circuit Alert 126-127 Cutters 140 Datacom/VDV 134-136 Electrician's Knife 142 Premium Electrician Scissors 143 Fuse Pullers 142 Locknut Wrenches 142 Multi-Tools 130 Pliers 137-138 Screwdrivers 141 Wire Strippers & Rippers 131-133 SWITCHES 144 Battery Shutoff Switches 152 Home Switches 152 Light Sockets 153-154 Pull Chain 149-150 Push Button 148-149 Rocker 150-151 Rotary 151 Toggle 147-148 USB Charging Ports 152 CONDUIT FISHING 94 Fish Sticks 101 Fish Tapes & Accessories 98-100 Lubricants 103 Pull Line/Line Carriers 96-97 nVent GARDNER BENDER Mini Cable Snake 99 Reel Rollers & Jacks 104 Rope 102 Wire Caddies & Carts 105-107
CONNECTORS nVent GARDNER BENDER wire connectors areengineered to exceed the expectations of professional electricians. Perfect for commercial or residential applications, nVent GARDNER BENDER wire connectors offer world-class quality, performance and application versatility.
nVent.com/GardnerBender | 7 Connectors Corrosion Inhibitors 16 nVent GARDNER BENDER Ox-Gard Anti Oxidant Compound 16 DataCom Connectors & Tool Bits 17 CAT-5E RJ-45 Modular Plugs 17 CAT-6 RJ-45 Modular Plugs 17 F-Series Coax Connector 17 F-Series Compression Connector 17 Wire Connectors Bits 17 Grounding Accessories 14 Box Solutions Kit 14 Mechanical Connectors 15-16 Aluminum Lugs 16 Aluminum Splicer Reducers 16 Copper Alloy - Tin Plated Split Bolts 15 Copper Mechanical Lugs 15 Copper Split Bolts 15 Tin Plated Copper Lugs 15 Specialty Connectors 12-13 Closed End Connectors 12 Crimp Connectors 13 Push-In Connectors 13 Ballast Disconnects & In-line Splices 14 Lever Connectors 13 Twist-on Connectors 9-12 Grounding Connectors 12 nVent GARDNER BENDER Hex-Lok Multi-Range Wire Connectors 11 HI-TEMP Connectors 12 nVent GARDNER BENDER Uni-Lok Universal Wire Connectors 11 nVent GARDNER BENDER WingGard Color-Coded Twist-On Connectors 10 nVent GARDNER BENDER WireGard Color-Coded Screw-On Connectors 9 Wire Range Chart 8
8 | nVent.com/GardnerBender Connectors GB-1 Gray GB-2 Blue GB-3 Orange GB-4 Yellow GB-6 Red WIRE RANGE CHART Model: Wire Combination 2#22 3#22 2#20 3#20 2#18 2#16 3#16 2#14 3#14 2#12 4#14 3#12 4#12 3#10 5#12 4#10 2#6 Min 1#20 + 1#22 Max 2#16 Min 3#22 Max 3#16 Min #1#20 + 2#22 Max 3#12 Min 2#14 Max 3#10 Min 3#20 Max 2#14 + 3#20 GB-3 Black GB-4 Black Hi-Temp Min 3#20 Max 2#14 + 3#20 Min 1#14 + 1#18 Max 4#14 + 1#18 84 Yellow GB86 Red 89 Blue WingGard Min 2#22 Max 3#12 Min 2#20 Max 4#10 Min 3#12 Max 1#6 + 2#8 95 Green GreenGard Min 2 #14 Max 4#12 H1 Tan H2 Gray Hex-Lox Min 2#22 Max 3#10 Min 1#16 + 4#18 Max 1#6 + 1#8 G1 Yellow G2 Red Uni-Lok Min 1#20 + 2#22 Max 3#12 Min 1#18 + 2#22 Max 5#12 + 1#20 All nVent GARDNER BENDER Twist-On Wire Connectors: • Are designed to make wiring jobs fast, easy, safe and reliable. • Provide maximum application flexibility by offering contractors myriad packaging options, ergonomic designs and wire ranges. • Exceed UL standards for dielectric strength, wire pullout force and static heat resistance. • Are manufactured of top-quality materials. • Meet the requirements of nearly all budgets. • Are continually evaluated for improvements and enhancements. Square wire spring for secure connection Zinc plated spring to resist corrosion Thermoplastic shell for strength and chemical resistance Swept wings for added turning torque (WingGard, Hex-Lok, GreenGard) Deep skirt for smooth wire entry and coverage of stripped wires WireGard
nVent.com/GardnerBender | 9 Connectors WIREGARD COLOR-CODED SCREW-ON CONNECTORS The industry standard twist-on connector with top quality, performance and durability. • Industry standard color-coded for easy size selection. • Tight, square-wire spring makes quick, secure connections for positive continuity. • Tough, thermoplastic shell made of polypropylene shields against environmental extremes. • Resists chemical action from hydrocarbons, diluted acid or alkaline solutions. • Flame-retardant properties resist heat distortion up to 105° C (221° F). • High-dielectric shell features deep skirt design to prevent exposure of bare wire. Part # Color Pack Qty. Wire Range Min Max 19-001 Gray 14/Clam #22 - #16 AWG 1 #20 + 1 #22 2 #16 25-001 Gray 25/Bag #22 - #16 AWG 1 #20 + 1 #22 2 #16 10-001 Gray 100/Box #22 - #16 AWG 1 #20 + 1 #22 2 #16 14-001 Gray 1000/Bag #22 - #16 AWG 1 #20 + 1 #22 2 #16 12-001 Gray 25000/Box #22 - #16 AWG 1 #20 + 1 #22 2 #16 19-002 Blue 14/Clam #22 - #14 AWG 3 #22 3 # 16 25-002 Blue 25/Bag #22 - #14 AWG 3 #22 3 # 16 10-002 Blue 100/Box #22 - #14 AWG 3 #22 3 # 16 16-002 Blue 150/Jar #22 - #14 AWG 3 #22 3 # 16 14-002 Blue 1000/Bag #22 - #14 AWG 3 #22 3 # 16 12-002 Blue 10000/Box #22 - #14 AWG 3 #22 3 # 16 12-002BU Blue 96000/Barrel #22 - #14 AWG 3 #22 3 # 16 19-003 Orange 12/Clam #22 - #14 AWG 3 #20 2 #14 + 3 #20 25-003 Orange 25/Bag #22 - #14 AWG 3 #20 2 #14 + 3 #20 17-003 Orange 50/Bag #22 - #14 AWG 3 #20 2 #14 + 3 #20 16-003 Orange 100/Jar #22 - #14 AWG 3 #20 2 #14 + 3 #20 10-003 Orange 100/Box #22 - #14 AWG 3 #20 2 #14 + 3 #20 16-003M Orange 300/Jar #22 - #14 AWG 3 #20 2 #14 + 3 #20 13-003 Orange 500/Bag #22 - #14 AWG 3 #20 2 #14 + 3 #20 12-003BU Orange 53000/Barrel #22 - #14 AWG 3 #20 2 #14 + 3 #20 19-004 Yellow 9/Clam #22 - #10 AWG 1 #20 + 2 #22 3 #12 25-004 Yellow 25/Bag #22 - #10 AWG 1 #20 + 2 #22 3 #12 17-004 Yellow 50/Bag #22 - #10 AWG 1 #20 + 2 #22 3 #12 10-004 Yellow 100/Box #22 - #10 AWG 1 #20 + 2 #22 3 #12 16-004 Yellow 200/Jar #22 - #10 AWG 1 #20 + 2 #22 3 #12 13-004 Yellow 500/Bag #22 - #10 AWG 1 #20 + 2 #22 3 #12 12-004BU Yellow 32400/Barrel #22 - #10 AWG 1 #20 + 2 #22 3 #12 19-006 Red 6/Clam #18 - #8 AWG 2 #14 3 #10 25-006 Red 25/Bag #18 - #8 AWG 2 #14 3 #10 17-006 Red 50/Bag #18 - #8 AWG 2 #14 3 #10 10-006 Red 100/Box #18 - #8 AWG 2 #14 3 #10 16-006 Red 125/Jar #18 - #8 AWG 2 #14 3 #10 13-006 Red 250/Bag #18 - #8 AWG 2 #14 3 #10 12-006BU Red 21000/Barrel #18 - #8 AWG 2 #14 3 #10 A B C E D A B C D E GB-1 (Gray) 37/64 (14.6) 11/64 (4.3) 1/8 (3.1) 1/4 (6.3) 21/64 (8.3) GB-2 (Blue) 45/64 (17.8) 11/64 (4.3) 3/16 (4.7) 5/16 (7.9) 25/64 (9.9) GB-3 (Orange) 27/32 (21.4) 21/64 (8.3) 13/64 (5.1) 11/32 (8.7) 7/16 (11.1) GB-4 (Yellow) 15/16 (23.8) 17/64 (6.7) 15/64 (5.9) 7/16 (11.1) 35/64 (13.8) GB-6 (Red) 1 1/16 (26.9) 17/64 (6.7) 21/64 (8.3) 17/32 (13.4) 21/32 (16.6) Dimensions - in (mm) Part # Description Pack Qty. Wire Range 19-AWC Assorted WireGard, 2 Gray, 2 Orange, 3 Yellow, 2 Red 9/Clam 22-8 AWG 25-AWC Assorted WireGard, 3 Gray, 4 Blue, 6 Orange, 6 Yellow, 6 Red 25/Bag 22-8 AWG CK-570 Wire Connector Kit with Assorted Connectors 570/Case 22-6 AWG TK-32 Slide card kit with 32 Assorted Wire Connectors 32/Card 22-10 AWG Assortments Cu to Cu Only GB-6 GB-2 GB-4 GB-1 GB-3 TWIST-ON CONNECTORS
10 | nVent.com/GardnerBender Connectors Part # Description Pack Qty. Wire Range 25-AWW Assorted & WingGard, 8 Yellow, 8 Red, 7 Tan, 2 Blue 25/Bag 22-6 AWG 16-8486M 80/80 Jar, Red & Yellow Connectors 160/Jar 22-6 AWG WINGGARD COLOR-CODED TWIST-ON CONNECTORS Unsurpassed quality and durability in a high-leverage, easy-on wing-type design. • Wings are knurled for a sure grip and offset from centerline for greater twisting leverage. • Square-wire plated spring instantly adjusts to the shape and size of the splice. • Flame-retardant properties resist heat distortion up to 105° C (221° F). • High-dielectric shell features deep skirt design to prevent exposure of bare wire. Part # Color Pack Qty. Wire Range Min Max 19-084 Yellow 6/Clam #22 - # 10 AWG 2#22 3 #12 25-084 Yellow 25/Bag #22 - # 10 AWG 2#22 3 #12 17-084 Yellow 50/Bag #22 - # 10 AWG 2#22 3 #12 16-084 Yellow 100/Jar #22 - # 10 AWG 2#22 3 #12 10-084 Yellow 100/Box #22 - # 10 AWG 2#22 3 #12 16-084M Yellow 225/Jar #22 - # 10 AWG 2#22 3 #12 13-084 Yellow 500/Bag #22 - # 10 AWG 2#22 3 #12 12-084BU Yellow 42000/Barrel #22 - # 10 AWG 2#22 3 #12 19-086 Red 6/Clam #22 - #6 AWG 2 #20 4 #10 25-086 Red 25/Bag #22 - #6 AWG 2 #20 4 #10 17-086 Red 50/Bag #22 - #6 AWG 2 #20 4 #10 10-086 Red 100/Box #22 - #6 AWG 2 #20 4 #10 16-086 Red 125/Jar #22 - #6 AWG 2 #20 4 #10 16-086L Red 325/Jar #22 - #6 AWG 2 #20 4 #10 13-086 Red 500/Bag #22 - #6 AWG 2 #20 4 #10 12-086BU Red 22500/Barrel #22 - #6 AWG 2 #20 4 #10 12-086BX Red 26000/Box #22 - #6 AWG 2 #20 4 #10 19-089 Blue 2/Clam #14 - #6 AWG 3 #12 1 #6 + 2 #8 25-089 Blue 10/Bag #14 - #6 AWG 3 #12 1 #6 + 2 #8 10-089 Blue 50/Box #14 - #6 AWG 3 #12 1 #6 + 2 #8 13-089 Blue 1100/Bag #14 - #6 AWG 3 #12 1 #6 + 2 #8 12-089BX Blue 12000/Box #14 - #6 AWG 3 #12 1 #6 + 2 #8 A B C D E 84 (Yellow) 1 1/32 (26.1) 5/16 (7.9) 7/32 (5.5) 1 1/4 (31.7) 23/32 (18.2) 86 (Red) 1 1/4 (31.7) 5/16 (7.9) 9/32 (7.1) 7/16 (11.1) 29/32 (23.0) 89 (Blue) 1 1/2 (38.1) 7/16 (11.1) 3/4 (19.0) 3/4 (19.0) 1 1/4 (31.7) Dimensions - in (mm) A C D E B Cu to Cu Only 89 84 86 Assortments
nVent.com/GardnerBender | 11 Connectors HEX-LOK MULTI-RANGE WIRE CONNECTORS Multi-range, hex-head copper-to-copper connector covers 95% of everyday applications. • Streamlined design with long skirt for compact installations. • Square-wire spring grabs and holds wires for secure connections. • Rated at 600 V Max. in building wire and at 1000 V Max. in lighting fixtures/luminaries and signs. Part # Color Pack Qty. Wire Range Min Max 19-1H1 Tan 6/Clam #22- #8 AWG 2 #22 3 #10 25-1H1 Tan 25/Bag #22- #8 AWG 2 #22 3 #10 17-1H1 Tan 50/Bag #22- #8 AWG 2 #22 3 #10 10-1H1 Tan 100/Box #22- #8 AWG 2 #22 3 #10 16-1H1 Tan 175/Jar #22- #8 AWG 2 #22 3 #10 16-1H1L Tan 400/Jar #22- #8 AWG 2 #22 3 #10 13-1H1 Tan 500/Bag #22- #8 AWG 2 #22 3 #10 12-1H1BU Tan 28000/Barrel #22- #8 AWG 2 #22 3 #10 12-1H1BX Tan 33000/Box #22- #8 AWG 2 #22 3 #10 19-2H2 Gray 3/Clam #18 - #6 AWG 1 #16 + 4 #18 1 #6 + 1 #8 25-2H2 Gray 15/Bag #18 - #6 AWG 1 #16 + 4 #18 1 #6 + 1 #8 10-2H2 Gray 50/Box #18 - #6 AWG 1 #16 + 4 #18 1 #6 + 1 #8 13-2H2 Gray 250/Bag #18 - #6 AWG 1 #16 + 4 #18 1 #6 + 1 #8 12-2H2BU Gray 16000/Barrel #18 - #6 AWG 1 #16 + 4 #18 1 #6 + 1 #8 A C D E B F A B C D E F H1 (Tan) 47/64 (18.6) 9/16 (14.2) 5/16 (7.9) 21/61 (8.7) 1 5/32 (29.3) 5/16 (7.9) H2 (Gray) 1 (25.4) 15/32 (11.9) 25/64 (9.9) 13/32 (10.3) 1 21/64 (33.7) 7/16 (11.1) UNI-LOK UNIVERSAL WIRE CONNECTORS Versatile and cost-effective, Uni-Lok connectors are designed to accept a wide range of wire combinations. • Long skirt covers stripped wires and swept mini-wings provide additional torque. • Square-wire spring grabs and holds wires for secure connections. • Rated at 600 V Max. in building wire and at 1000 V Max. in lighting fixtures/luminaries and signs. Part # Color Pack Qty. Wire Range Min Max 25-1G1 Yellow 25/Bag #22 - #10 AWG 1 #20 + 2 #22 3 #12 10-1G1 Yellow 100/Box #22 - #10 AWG 1 #20 + 2 #22 3 #12 13-1G1 Yellow 500/Bag #22 - #10 AWG 1 #20 + 2 #22 3 #12 25-2G2 Red 25/Bag #22 - #8 AWG 1 #18 + 2 #22 5 #12 + 1 #20 10-2G2 Red 100/Box #22 - #8 AWG 1 #18 + 2 #22 5 #12 + 1 #20 13-2G2 Red 500/Bag #22 - #8 AWG 1 #18 + 2 #22 5 #12 + 1 #20 A C D E B A B C D E G1 (Yellow) 31/64 (12.3) 27/64 (10.7) 9/32 (7.1) 13/32 (10.3) 63/64 (25.0) G2 (Red) 37/64 (14.6) 33/64 (13.0) 23/64 (9.1) 27/64 (10.7) 1 11/64 (29.7) Dimensions - in (mm) H2 H1 Cu to Cu Only G2 G1 Dimensions - in (mm)
12 | nVent.com/GardnerBender Connectors SPECIALTY CONNECTORS CLOSED END CONNECTORS Crimp connector designed for use with solid or stranded wire. • Vibration, Corrosion, and Chemical resistant. • Tin-plated seamless copper. Part # Color Pack Qty. Wire Range Min Max 20-089 White 10/Clam #22 - #14 AWG 2 #22 1 #14 + 1 #18 20-090 White 10/Clam #22 - #10 AWG 3 #18 1 #10 + 1 #20 15-090 White 15/Clam #22 - #10 AWG 3 #18 1 #10 + 1 #20 20-089 & 20-090 Cu to Cu Only GROUNDING CONNECTORS Specifically designed for making positive ground connections, GreenGard connectors feature the same live-action as WingGard connectors with the added plating protection for corrosion resistance in grounding applications. • Easier to use — New design enables torque-up with improved grip, contoured, offset wings and firm ground connections. • Connectors have a hole in the tip for ground wire. A B C D E Part # Color Pack Qty. Wire Range Min Max 19-095 Green 6/Clam #14 - #10 AWG 2 #14 4 #12 25-095 Green 25/Bag #14 - #10 AWG 2 #14 4 #12 10-095 Green 100/Box #14 - #10 AWG 2 #14 4 #12 13-095 Green 500/Bag #14 - #10 AWG 2 #14 4 #12 12-095BX Green 26000/Box #14 - #10 AWG 2 #14 4 #12 A B C D E 95 (Green) 1 1/4 (31.7) 5/16 (7.9) 9/32 (7.1) 7/16 (11.1) 29/32 (23.0) Dimensions - in (mm) 95 Cu to Cu Only Connectors manufactured with high-temperature-rated plastic to withstand extreme temperatures. • Temperature-rated to 150° C (302° F). • Available in two standard models. HI-TEMP CONNECTORS Part # Color Pack Qty. Wire Range Min Max 19-003HT Black 10/Clam #20 - #14 AWG 3 #20 2 #14 + 3 #20 10-003HT Black 100/Box #20 - #14 AWG 3 #20 2 #14 + 3 #20 27-003 Black 10000/Box #20 - #14 AWG 3 #20 2 #14 + 3 #20 19-004HT Black 10/Clam #18 - #10 AWG 1 #14 + 1 #18 4 #14 + 1 #18 10-004HT Black 100/Box #18 - #10 AWG 1 #14 + 1 #18 4 #14 + 1 #18 27-004 Black 10000/Box #18 - #10 AWG 1 #14 + 1 #18 4 #14 + 1 #18 Cu to Cu Only GB-3 Black GB-4 Black A B C E D D E C B A A B C D E GB-3 Black 11/32 (8.7) 27/32 (21.4) 7/16 (11.1) 3/16 (4.7) 11/32 (8.7) GB-4 Black 9/32 (7.1) 15/16 (23.8) 17/32 (13.4) 7/32 (5.5) 7/16 (11.1) Dimensions - in (mm) A B C D E 20-089 11/32 (8.7) 1/4 (6.3) 5/32 (3.9) 15/64 (5.9) 9/16 20-090 31/64 (12.3) 13/32 (10.3) 11/64 (4.3) 25/64 (9.9) 63/64 Dimensions - in (mm)
nVent.com/GardnerBender | 13 Connectors CRIMP CONNECTORS Use nVent GARDNER BENDER crimp connectors for strong, vibration-resistant permanent connections in branch circuit and fixture wiring. • Two styles and sizes available. • Copper or zinc-plated steel. Introducing our new LeverGard wire connectors. LeverGard connectors have the ability to secure both stranded and solid wire. The versatility that LeverGard connectors offer give the ability to secure 24-12 AWG solid/stranded wire within a number of different ports. • Strong protruding levers w/ anti-slip design and for easy use. • Clear body design to show wire is secure and connected. • Allows for multiple wire size combination to fit in one connector. • 24-12 AWG Solid/Stranded wire. • 600V max rated w/ 105° C (221° F) max temp rating Part # Type Pack Qty. Wire Range Min Max 10-310C Copper 100/Clam #18 - #10 AWG 2 #16 2 #10 + 1 #12 10-311C Copper 50/Clam #14 - #8 AWG 3 #12 4 #10 20-410 Zinc-Plated Steel 12/Clam #18 - #10 AWG 2 #16 2 #10 + 1 #12 10-410 Zinc-Plated Steel 100/Box #18 - #10 AWG 2 #16 2 #10 + 1 #12 10-410C Zinc-Plated Steel 100/Clam #18 - #10 AWG 2 #16 2 #10 + 1 #12 13-410 Zinc-Plated Steel 500/Bag #18 - #10 AWG 2 #16 2 #10 + 1 #12 27-410 Zinc-Plated Steel 10000/Box #18 - #10 AWG 2 #16 2 #10 + 1 #12 20-411 Zinc-Plated Steel 8/Clam #14 - #8 AWG 3 #12 4 #10 10-411 Zinc-Plated Steel 50/Box #14 - #8 AWG 3 #12 4 #10 Part # Color Pack Qty. Wire Range # of Ports 19-PCL2 Clear/Green 10/Bag #24 - #12 AWG Solid/Str. 2 19-PCL3 Clear/Green 10/Bag #24 - #12 AWG Solid/Str. 3 19-PCL5 Clear/Green 10/Bag #24 - #12 AWG Solid/Str. 5 A B C D 310/311 (Copper) 3/8 (9.5) 19/64 (7.5) 1/4 (6.3) 13/64 (5.1) 410/411 (Steel) 5/8 (15.8) 23/64 (9.1) 21/64 (8.3) 17/64 (6.7) D B C A Dimensions - in (mm) PUSH-IN CONNECTORS Easy and fast to use, just strip and push conductors into PushGard connectors to make reliable, secure connections. • Clear polycarbonate housings have color-coded side panels for connection verification and identification. • With corrosion-resistant stainless steel springs, PushGard connectors restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. • Continuity test point for easy voltage checks. • Rated at 600 V Max. in building wire and at 1000 V Max. in lighting fixtures/luminaries. Part # Color Pack Qty. Wire Range # of Ports 19-PC2 Red 10/Clam #22 - #12 AWG Solid 2 10-PC2 Red 100/Jar #22 - #12 AWG Solid 2 19-PC3 Orange 10/Clam #22 - #12 AWG Solid 3 10-PC3 Orange 100/Jar #22 - #12 AWG Solid 3 19-PC4 Yellow 10/Clam #22 - #12 AWG Solid 4 10-PC4 Yellow 100/Jar #22 - #12 AWG Solid 4 19-PC8 Black 10/Clam #22 - #12 AWG Solid 8 10-PC8 Black 50/Jar #22 - #12 AWG Solid 8 Cu to Cu Only .37 in (9.3 mm) .61 in (15.4 mm) .73 in (18.5 mm) .78 in (19.8 mm) .37 in (9.3 mm) .73 in (18.5 mm) 1.44 in (36.5 mm) .31 in (7.8 mm) .66 in (16.7 mm) PC3 PC4 PC8 .41 in (10.4 mm) .51 in (12.9 mm) .72 in (18.2 mm) 19-PCL2 .41 in (10.4 mm) .74 in 18.7 mm) .72 in (18.2 mm) 19-PCL3 .41 in (10.4 mm) 1.17 in (29.7 mm) .72 in (18.2 mm) 19-PCL5 311 19-PCL2 19-PCL5 310 411 410 Cu to Cu Only .37 in (9.3 mm) .43 in (10.9 mm) .72 in (18.2 mm) PC2 NEW LEVER CONNECTORS 19-PCL3 PC8 PC4 PC3 PC2
14 | nVent.com/GardnerBender Connectors GROUNDING ACCESSORIES GROUNDING ACCESSORIES Convenient grounding accessories include products suitable for most job requirements. • Zinc-plated grounding clips provide positive grounding to switch, outlet or junction boxes for #10, 12, 14 AWG copper grounding wire. • Grounding clamps listed for connection of ground wire. • Fork terminals for 8-10 stud. Part # Pack Qty. Description Length (in / cm) Ends 14-GRC 1/Card Grounding Clamp for 1/2 in - 1 in (12.7 mm - 25.4 mm) pipe - - GGC-1508 8/Card Grounding Clip for Aluminum or Copper; Grounding wire; Zinc-plated - - GGP-1261 25/Bag Grounding Pigtail; #12 AWG Solid 6 1/2 / 16.5 Captured Screw/Stripped GGP-1461 25/Bag Grounding Pigtail; #14 AWG Solid 6 1/2 / 16.5 Captured Screw/Stripped GGP-1502 2/Card Grounding Pigtail; #12 AWG Str 8 / 20.3 Captured Screw/Bare Fork Terminal GGS-1512R 12/Card Green Hex-Head Ground Screw 10-32 x 3/8 in (9.5 mm) - - GGS-1032HC 100/Clam Green Hex-Head Ground Screw 10-32 x 3/8 in (9.5 mm) - - Part # Description Pack Qty. BSK-100 6-32 & 8-32 flat/oval head machine and wallplate screws, grounding screws, and electrical spacers. 124/Kit GGP-1502 14-GRC BSK-100 GGS-1032HC Part # Color Pack Qty. Wire Range Style 10-SL Gray 100/Bag #18 - #16 AWG Solid/Str. In-Line Splice, 1-wire 25-LD2 Orange 25/Bag #18 - #12 AWG Solid/Str. Ballast Disconnect, 2-wire nVent GARDNER BENDER Ballast Disconnects & In-line Splices help prevent the risk of electrocution when replacing lighting ballasts. Our push-in style disconnects help make replacing a ballast quick and easy. • Push-in/stab technology allow for a safe and easy connection. • 18-16 AWG Solid/Str. In-line splice. • 18-12 AWG Solid/Str. Ballast Disconnect. • 600V max rated w/ 105° C (221° F) max temp rating BALLAST DISCONNECTS & IN-LINE SPLICES NEW nVent GARDNER BENDER’s Box solutions kit offers a perfect assortment of products that are required for both Pros and DIYers to properly complete tasks such as wiring device installations and electrical box installations. The Kit contains everything from grounding screw/clips to machine screws and twist-apart spacers making it essential for any type of electrical box installation. BOX SOLUTIONS KIT NEW • All in one kit that helps save time and money. • Flat and Oval head screws. • Electrical spacers. • Wall plate screws. • Grounding clips/screws. 25-LD2
nVent.com/GardnerBender | 15 Connectors TIN PLATED COPPER LUGS Heavy-duty lugs made from pure copper for maximum current flow. • Tinned for corrosion resistance. • Seamless barrel for maximum strength. • Closed ends seal out moisture. Part # Color Pack Qty. Wire Range Stud Size AML-200 Copper 2/Clam #6 AWG 1/4 in (6.3 mm) AML-201 Copper 2/Clam #6 AWG 5/16 in (7.9 mm) AML-202 Copper 2/Clam #6 AWG 3/8 in (9.5 mm) AML-203 Copper 2/Clam #4 AWG 5/16 in (7.9 mm) AML-204 Copper 2/Clam #4 AWG 3/8 in (9.5 mm) AML-205 Copper 2/Clam #2 AWG 5/16 in (7.9 mm) AML-206 Copper 2/Clam #2 AWG 3/8 in (9.5 mm) AML-207 Copper 2/Clam #1/0 AWG 3/8 in (9.5 mm) AML-208 Copper 2/Clam #2/0 AWG 3/8 in (9.5 mm) COPPER SPLIT BOLTS All-copper alloy construction for high mechanical strength, maximum conductivity and low resistance. • Accept a wide range of solid and stranded conductors from 16 AWG – 3/0 AWG. • Can be torqued with standard wrenches. MECHANICAL CONNECTORS Part # Color Pack Qty. Wire Range GSBC-1/0 Copper 1/Clam #4 - #1/0 AWG GSBC-2/0 Copper 1/Clam #2 - #2/0 AWG GSBC-3/0 Copper 1/Clam #2 - #3/0 AWG GSBC-8 Copper 2/Clam #16 - #10 AWG Stranded, #16 - #8 AWG Solid GSBC-6 Copper 2/Clam #10 AWG Stranded, #10 - #8 AWG Solid GSBC-4 Copper 2/Clam #8 - #4 AWG GSBC-2 Copper 2/Clam #6 - #2 AWG GSBC-4 AML-204 GSLU-70N Part # Color Pack Qty. Wire Range Stud Size GSLU-35N Copper 2/Clam #14 - #6 AWG Solid or Stranded #10 GSLU-70N Copper 2/Clam #8 - #2 AWG Solid or Stranded 1/4 in (6.3 mm) GSLU-125 Copper 2/Clam #8 - #1/0 AWG Solid or Stranded 3/8 in (9.5 mm) COPPER MECHANICAL LUGS Provide maximum mechanical strength and minimum resistance. • All-copper alloy construction features a compact design that is reusable. • Accept a wide range of solid and stranded conductors from 14 AWG – 0 AWG. COPPER ALLOY - TIN PLATED SPLIT BOLTS Tin plated copper alloy construction for high mechanical strength, maximum conductivity and low resistance. Highly resistant to corrosion and season cracking. • Accept a wide range of solid and stranded conductors from 10 AWG - 4/0 AWG. • Use nVent GARDNER BENDER Ox-Gard anti-oxidant treatment on Al-Al and Al-Cu to prevent corrosion and permit cooler connections. Part # Type Pack Qty. Wire Range GAK-2/0* Copper Alloy - Tin Plated 1/Clam #10 AWG Stranded, #10 - #2/0 AWG Solid GAK-2* Copper Alloy - Tin Plated 1/Clam #8 - #2 AWG Solid GAK-4N* Copper Alloy - Tin Plated 1/Clam #10 - #4 AWG Solid GAK-1/0* Copper Alloy - Tin Plated 1/Clam #8 - #1/0 AWG Solid GAK-4/0* Copper Alloy - Tin Plated 1/Clam #6 - #4/0 AWG Solid Rated for Cu to Cu GAK-2*
16 | nVent.com/GardnerBender Connectors OX-GARD ANTI OXIDANT COMPOUND The perfect safeguard for aluminum-to-aluminum, aluminum-to-copper wire connections and aluminum conduit joints and copper-to-copper. • Guards against oxidation. • Improves conductivity; penetrates aluminum oxide to maintain inter-strand and inter-conductor current paths. • Produces a cooler connection. CORROSION INHIBITORS Part # Pack Qty. Description OX-100B 1/Tube 1 oz (29.5 mL) Squeeze Tube OX-400N 1/Tube 4 oz (118.2 mL) Squeeze Tube OX-800 1/Tube 8 oz (236.5 mL) Squeeze Tube OX-100B ALUMINUM SPLICER REDUCERS Designed to splice similar-gauge conductors or reduce the gauge from a larger wire diameter to a smaller one. • Galvanic corrosion is limited by an internal wire stop, preventing direct contact of dissimilar metals inside. • Use nVent GARDNER BENDER Ox-Gard anti-oxidant treatment on Al-Al and Al-Cu to prevent corrosion and permit cooler connections. Part # Color Pack Qty. Wire Range GSPA-0N Aluminum 1/Clam #14 - #1/0 AWG Stranded GSPA-2N Aluminum 2/Clam #14 - #2 AWG Stranded GSPA-4/0 Aluminum 1/Clam #6 - #4/0 AWG Stranded ALUMINUM LUGS • Feature high-strength, low-resistance aluminum construction. • Accepts conductors from 14 AWG - 2/0 AWG. • For 3/8 in (9.5 mm) stud. • Use nVent GARDNER BENDER Ox-Gard anti-oxidant treatment on Al-Al and Al-Cu to prevent corrosion and permit cooler connections. Part # Color Pack Qty. Wire Range GTA-2N Aluminum 2/Clam #14 - #2 AWG Stranded GTA-2/0 Aluminum 2/Clam #14 - #2/0 AWG Stranded GSPA-2 GTA-2
nVent.com/GardnerBender | 17 Connectors DATACOM CONNECTORS & TOOL BITS CAT-5E RJ-45 MODULAR PLUGS • For use with network/twisted pair cable CAT-5e. • 8-Position connectors. Part # Color Pack Qty. Type # of Contacts GMC-88M5 Clear 8/Bag CAT-5e Modular Plug 8 GMC-88C5 Clear 50/Bag CAT-5e Modular Plug 8 GMC-88M5 GMC-88M6 CAT-6 RJ-45 MODULAR PLUGS • For use with network/twisted pair cable CAT-6. • 8-Position connectors. Part # Color Pack Qty. Type # of Contacts GMC-88C6 Clear 8/Bag CAT-6 Modular Plug 8 GMC-88M6 Clear 50/Bag CAT-6 Modular Plug 8 GDC-6C F-SERIES COMPRESSION CONNECTOR • F-Type Coaxial Connector. • For use with RG-6/Quad Coaxial Cable. • Nickel plated to resist corrosion. Part # Color Pack Qty. Type GDC-6CM Silver 4/Bag RG-6/Quad Compression Connector GDC-6C Silver 50/Bag RG-6/Quad Compression Connector F-SERIES COAX CONNECTOR • Female Adapter. • Used to combine two lengths of coaxial cable. • Used to connect cables through walls. Part # Color Pack Qty. Type GDC-FAM Silver 2/Bag RG-6 Coax Connector GDC-FAM data com WIRE CONNECTORS BITS The nVent GARDNER BENDER Wire Connector Bit set is the faster and easier way to tighten wire connectors. Compatible with powered drills/drivers, 1/4" nut drivers, and many multi-bit screwdrivers. This economical 3 pack includes bits for standard and winged wire connectors from most manufacturers, in a broad range of sizes. • Tighten connectors using powered drill/driver, nut driver, or multi-bit screwdriver. • Fits connectors from most manufacturers. • Fits standard and winged style connectors, in a broad range of sizes. • Small tool for small to medium standard; medium tool for small winged, medium to large standard; large tool for large/winged. Part # Color Pack Qty. Sizes WB1 Black 3 Small Tool(#3-49), Medium Tool(#4-57), Large Tool(#5-63) WB1
TERMINALS & WIRE Dependable and easy to use, nVent GARDNER BENDER terminals and wiring accessories offer the high quality and application flexibility that professionals demand. Available in a variety of packaging options, look to nVent GARDNER BENDER for secure wire connection options.
nVent.com/GardnerBender | 19 Terminals & Wire Charging Clips 25 Alligator Clips 25 Heavy Duty Charging Clips 25 Medium Duty Charging Clips 25 General Purpose Terminals 21-23 Bullet Splices - Fully Insulated 22 Butt Splices 21 Disconnects - Fully Insulated 22 Disconnects - Vinyl Insulated 21 Ring Terminals - Vinyl Insulated 23 Spade Terminals - Vinyl Insulated 23 Tap Splices 22 Heat-Shrink Terminals 20 Butt Splices 20 Disconnect- Solder 20 Ring Terminals 20 Spade Terminals 20 Primary Wire 26 Tin Plated Copper Primary Wire 26 Terminal Blocks 24 Terminals Kits and Assortments 27-29 Tap Splice Kits 28 Vinyl insulated Terminal Kits 27 Vinyl Insulated Terminal Kits w/ Multi-Tool and Wire Connectors 29 Vinyl Insulated Terminal Kits w/ Wire Connectors 28 Underground Splice Kits 24 Underground Butt Splice Kit (#8 - #2 AWG) 24 Underground Butt Splice Kit (#14 - #8 AWG) 24 Underground UF Splice Kit 24
20 | nVent.com/GardnerBender Terminals & Wire BUTT SPLICES Length (L) Barrel I.D. (C) Part # Color Pack Qty. Inches MM Inches MM Wire Range AMT-120 Red 3/Clam 1.33 33.71 0.07 1.7 #22 - #18 AWG AMT-4120 Red 8/Clam 1.33 33.71 0.07 1.7 #22 - #18 AWG AMT-121 Red 25/Clam 1.33 33.71 0.07 1.7 #22 - #18 AWG AMT-123 Blue 3/Clam 1.33 33.71 0.09 2.3 #16 - #14 AWG AMT-4123 Blue 7/Clam 1.33 33.71 0.09 2.3 #16 - #14 AWG AMT-124 Blue 25/Clam 1.33 33.71 0.09 2.3 #16 - #14 AWG AMT-126 Yellow 3/Clam 1.33 33.71 0.13 3.4 #12 - #10 AWG AMT-5126 Yellow 4/Clam 1.33 33.71 0.13 3.4 #12 - #10 AWG AMT-4126 Yellow 5/Clam 1.33 33.71 0.13 3.4 #12 - #10 AWG AMT-127 Yellow 25/Clam 1.33 33.71 0.13 3.4 #12 - #10 AWG XTM-240* Red 6/Clam 1.61 40.89 0.07 1.7 #22 - #18 AWG XTM-245* Blue 6/Clam 1.61 40.89 0.09 2.3 #16 - #14 AWG XTM-250* Yellow 4/Clam 1.61 40.89 0.13 3.4 #12 - #10 AWG *Solder Terminals HEAT-SHRINK TERMINALS RING TERMINALS Length (L) Width (W) Barrel I.D. (C) Part # Color Pack Qty. Inches MM Inches MM Inches MM Wire Range Stud Size AMT-100 Red 3/Clam 1.37 34.80 0.4 10.16 0.067 1.7 #22 - #18 AWG 10 AMT-4100 Red 6/Clam 1.37 34.80 0.4 10.16 0.067 1.7 #22 - #18 AWG 10 AMT-103 Blue 3/Clam 1.37 34.80 0.4 10.16 0.091 2.3 #16 - #14 AWG 8 AMT-4103 Blue 6/Clam 1.37 34.80 0.4 10.16 0.091 2.3 #16 - #14 AWG 8 AMT-106 Yellow 3/Clam 1.37 34.80 0.4 10.16 0.131 3.4 #12 - #10 AWG 8 AMT-108 Yellow 3/Clam 1.88 47.75 0.56 14.22 0.131 3.4 #12 - #10 AWG 1/4 in (6.3 mm) AMT-4106 Yellow 5/Clam 1.37 34.80 0.4 10.16 0.131 3.4 #12 - #10 AWG 10 AMT-5104* Blue 4/Clam 1.67 42.42 0.4 10.16 0.091 2.3 #16 - #14 AWG 10 AMT-5106* Yellow 3/Clam 1.67 42.42 0.4 10.16 0.131 3.4 #12 - #10 AWG 10 *Solder Ring Terminals SPADE TERMINALS Length (L) Width (W) Barrel I.D. (C) Part # Color Pack Qty. Inches MM Inches MM Inches MM Wire Range Stud Size AMT-110 Red 3/Clam 1.38 35.05 0.36 9.14 0.067 1.7 #22 - #18 AWG 8 to 10 AMT-4110 Red 6/Clam 1.38 35.05 0.36 9.14 0.067 1.7 #22 - #18 AWG 8 to 10 AMT-113 Blue 3/Clam 1.38 35.05 0.36 9.14 0.091 2.3 #16 - #14 AWG 8 to 10 AMT-4113 Blue 6/Clam 1.38 35.05 0.36 9.14 0.091 2.3 #16 - #14 AWG 8 to 10 AMT-116 Yellow 3/Clam 1.39 35.05 0.4 10.16 0.131 3.4 #12 - #10 AWG 8 to 10 AMT-4116 Yellow 5/Clam 1.39 35.05 0.4 10.16 0.131 3.4 #12 - #10 AWG 8 to 10 DISCONNECTS- SOLDER Length (L) Width (W) Barrel I.D. (C) Tab Size Part # Color Pack Qty. Inches MM Inches MM Inches MM Wire Range Type XTM220 Red 3 Pairs/ Clam 1.47 - 1.55 37.34 - 39.37 0.23 5.842 0.067 1.7 #22 - #18 AWG .25 in (6.3 mm) F/M Pairs XTM225 Blue 3 Pairs/ Clam 1.47 - 1.55 37.34 - 39.37 0.26 6.604 0.091 2.3 #16 - #14 AWG .25 in (6.3 mm) F/M Pairs AMT-120, AMT-123 & AMT-126 AMT-100, AMT-103 & AMT-108 AMT-110, AMT-113 & AMT-116 XTM-220, XTM-225 Constructed with Heat Shrink insulation - adhesive lined to waterproof and environmentally seal electrical connections when crimped and heated. • I nsulates and protects connections from wire pullout, moisture intrusion and abrasion. • H eat-activated adhesive melts and flows to create a seal. • R esists salt water, oil, gasoline and other environmental contaminants. • Rated at 600 Volt Max. • Temperature rating: –67˚ to 221˚ F (–55˚ to 105˚ C). • 2.5:1 shrink ratio. • Heat to 275˚ F (135˚ C).
nVent.com/GardnerBender | 21 Terminals & Wire DISCONNECTS - VINYL INSULATED • Rated at 300 Volt Max. BUTT SPLICES • Rated at 600 Volt Max. GENERAL PURPOSE TERMINALS Length (L) Width (W) Barrel I.D. (C) Part # Color Pack Qty. Inches MM Inches MM Inches MM Wire Range Tab Size (in / mm) Type 21-146F Red 10/Clam 0.75 19.0 0.2 5.0 0.067 1.7 #22 - #16 AWG .187 / 4.7 Female 21-146M Red 10/Calm 0.75 19.0 0.2 5.0 0.067 1.7 #22 - #16 AWG .187 / 4.7 Male 20-141M Red 18/Clam 0.83 21.0 0.3 6.4 0.067 1.7 #22 - #16 AWG .25 / 6.3 Male 20-141F Red 21/Clam 0.81 20.5 0.3 6.6 0.067 1.7 #22 - #16 AWG .25 / 6.3 Female 10-141F Red 100/Clam 0.81 20.5 0.3 6.6 0.067 1.7 #22 - #16 AWG .25 / 6.3 Female 10-141M Red 100/Clam 0.83 21.0 0.3 6.4 0.067 1.7 #22 - #16 AWG .25 / 6.3 Male 15-182 Red 15/Clam .73 - .81 18.6 - 20.5 .13 - .26 3.2 - 6.6 0.067 1.7 #22 - #16 AWG .11 to .25 / 2.7 to 6.3 Female 21-143F Blue 10/Clam 0.81 20.5 0.3 6.6 0.091 2.3 #16 - #14 AWG .25 / 6.3 Female 15-143M Blue 14/Clam 0.83 21.0 0.3 6.4 0.091 2.3 #16 - #14 AWG .25 / 6.3" Male 15-143F Blue 15/Clam 0.81 20.5 0.3 6.6 0.091 2.3 #16 - #14 AWG .25 / 6.3 Female 20-143M Blue 18/Clam 0.83 21.0 0.3 6.4 0.091 2.3 #16 - #14 AWG .25 / 6.3 Male 20-143F Blue 20/Clam 0.81 20.5 0.3 6.6 0.091 2.3 #16 - #14 AWG .25 / 6.3 Female 10-143F Blue 100/Clam 0.81 20.5 0.3 6.6 0.091 2.3 #16 - #14 AWG .25 / 6.3 Female 15-184 Blue 15/Clam .73 - .81 18.6 - 20.5 .126 - .26 3.2 - 6.6 0.091 2.3 #16 - #14 AWG .11 to .25 / 2.7 to 6.3 Female 21-145F Yellow 8/Clam 0.93 23.5 0.3 6.6 0.134 3.4 #12 - #10 AWG .25 / 6.3 Female 15-145F Yellow 15/Clam 0.93 23.5 0.3 6.6 0.134 3.4 #12 - #10 AWG .25 / 6.3 Female 20-145F Yellow 16/Clam 0.93 23.5 0.3 6.6 0.134 3.4 #12 - #10 AWG .25 / 6.3 Female 20-145M Yellow 16/Clam 0.95 24.0 0.3 6.4 0.134 3.4 #12 - #10 AWG .25 / 6.3 Male 10-145F Yellow 100/Clam 0.93 23.5 0.3 6.6 0.134 3.4 #12 - #10 AWG .25 / 6.3 Female 10-145M Yellow 100/Clam 0.95 24.0 0.3 6.4 0.134 3.4 #12 - #10 AWG .25 / 6.3 Male Length (L) Barrel I.D. (C) Part # Color Pack Qty. Inches MM Inches MM Wire Range 15-121 Red 15/Clam 0.97 24.6 0.067 1.7 #22 - #16 AWG 20-121 Red 22/Clam 0.97 24.6 0.067 1.7 #22 - #16 AWG 75-121 Red 75/Clam 0.97 24.6 0.067 1.7 #22 - #16 AWG 10-121 Red 100/Clam 0.97 24.6 0.067 1.7 #22 - #16 AWG 15-123 Blue 15/Clam 0.97 24.6 0.098 2.5 #16 - #14 AWG 20-123 Blue 21/Clam 0.97 24.6 0.098 2.5 #16 - #14 AWG 75-123 Blue 75/Clam 0.97 24.6 0.098 2.5 #16 - #14 AWG 10-123 Blue 100/Clam 0.97 24.6 0.098 2.5 #16 - #14 AWG 15-126 Yellow 15/Clam 1.04 26.5 0.134 3.4 #12 - #10 AWG 20-126 Yellow 15/Clam 1.04 26.5 0.134 3.4 #12 - #10 AWG 10-126 Yellow 50/Clam 1.04 26.5 0.134 3.4 #12 - #10 AWG 75-126 Yellow 50/Clam 1.04 26.5 0.134 3.4 #12 - #10 AWG 15-120 Red/Blue/Yellow 15/Clam .97 - 1.04 24.6 - 26.5 .067 - .134 1.7 - 3.4 #22 - #10 AWG Quick and reliable crimp-type wire connections. • Color-coded by wire gauge size. • Available in a variety of packaging options and stud sizes. • Includes Spade and Ring Terminals, Disconnects, and Bullet, Butt & Tap Splices. 15-121, 20-123 & 10-126 20-141M, 20-143M & 20-145M 20-141F, 20-143F & 20-145F • Temperature rating: 167˚ F (75˚ C). • Temperature rating: 167˚ F (75˚ C).
22 | nVent.com/GardnerBender Terminals & Wire DISCONNECTS - FULLY INSULATED • Rated at 300 Volt Max. • Temperature rating: 167˚ F (75˚ C). BULLET SPLICES - FULLY INSULATED • Rated at 300 Volt Max. • Temperature rating: 167˚ F (75˚ C). Length (L) Width (W) Barrel I.D. (C) Tab Size (in / mm) Part # Color Pack Qty. Inches MM Inches MM Inches MM Wire Range Type 15-152P Red/Blue 6 Pairs/Clam 0.87 - .95 22 - 24 .25 - .26 6.4 - 6.6 .067 - .091 1.7 - 2.3 #22 - #14 AWG .25 / 6.3 F/M Pairs 20-151P Red 10 Pairs/Clam 0.87 - .95 22 - 24 .25 - .26 6.4 - 6.6 0.067 1.7 #22 - #16 AWG .25 / 6.3 F/M Pairs 15-151F Red 15/Clam 0.87 22 0.26 6.6 0.067 1.7 #22 - #16 AWG .25 / 6.3 Female 15-151M Red 15/Clam 0.95 24 0.25 6.4 0.067 1.7 #22 - #16 AWG .25 / 6.3 Male 10-151F Red 100/Clam 0.87 22 0.26 6.6 0.067 1.7 #22 - #16 AWG .25 / 6.3 Female 15-153F Blue 15/Clam 0.87 22 0.26 6.6 0.091 2.3 #16 - #14 AWG .25 / 6.3 Female 15-153M Blue 15/Clam 0.95 24 0.25 6.4 0.091 2.3 #16 - #14 AWG .25 / 6.3 Male 20-153F Blue 20/Clam 0.87 22 0.26 6.6 0.091 2.3 #16 - #14 AWG .25 / 6.3 Female 20-153P Blue 10 Pairs/Clam 0.87 - .95 22 - 24 .25 - .26 6.35 - 6.6 0.091 2.3 #16 - #14 AWG .25 / 6.3 F/M Pairs 10-153P Blue 50 Pairs/Clam 0.87 - .95 22 - 24 .25 - .26 6.35 - 6.6 0.091 2.3 #16 - #14 AWG .25 / 6.3 F/M Pairs 10-153M Blue 80/Clam 0.95 24 0.25 6.4 0.091 2.3 #16 - #14 AWG .25 / 6.3 Male 10-153F Blue 100/Clam 0.87 22 0.26 6.6 0.091 2.3 #16 - #14 AWG .25 / 6.3 Female 21-155F Yellow 4/Clam 0.95 24 0.26 6.6 0.134 3.4 #12 - #10 AWG .25 / 6.3 Female 21-155M Yellow 4/Clam 0.98 25 0.25 6.4 0.134 3.4 #12 - #10 AWG .25 / 6.3 Male 15-155F Yellow 10/Clam 0.95 24 0.26 6.6 0.134 3.4 #12 - #10 AWG .25 / 6.3 Female 15-155M Yellow 10/Clam 0.98 25 0.25 6.4 0.134 3.4 #12 - #10 AWG .25 / 6.3 Male 10-155F Yellow 50/Clam 0.95 24 0.26 6.6 0.134 3.4 #12 - #10 AWG .25 / 6.3 Female Length (L) Width (W) Barrel I.D. (C) Part # Color Pack Qty. Inches MM Inches MM Inches MM Wire Range Tab Size (in / mm) Type 20-161P Red 5 Pairs/Clam .87 - .99 22- 25.2 .15 - .16 3.9 - 4 0.067 1.7 #22 - #16AWG .156 / 3.9 F/M Pairs 21-161F Red 6/Clam 0.99 25.2 0.15 3.9 0.067 1.7 #22 - #16AWG .156 / 3.9 Female 21-161M Red 6/Clam 0.87 22 0.16 4 0.067 1.7 #22 - #16AWG .156 / 3.9 Male 15-163P Blue 5 Pairs/Clam .87 - .99 22- 25.2 .15 - .16 3.9 - 4 0.091 2.3 #16 - #14 AWG .156 / 3.9 F/M Pairs 20-163F Blue 20/Clam 0.99 25.2 0.15 3.9 0.091 2.3 #16 - #14 AWG .156 / 3.9 Female 20-163M Blue 20/Clam 0.87 22 0.16 4 0.091 2.3 #16 - #14 AWG .156 / 3.9 Male 10-163P Blue 50 Pairs/Clam .87 - .99 22- 25.2 .15 - .16 3.9 - 4 0.091 2.3 #16 - #14 AWG .156 / 3.9 F/M Pairs 20-163P Blue 10 Pairs/Clam .87 - .99 22- 25.2 .15 - .16 3.9 - 4 0.091 2.3 #16 - #14 AWG .156 / 3.9 F/M Pairs 15-162P Yellow 5 Pairs/Clam .93 - 0.95 23.5 - 24 0.19 - 2 4.9 - 5 0.134 3.4 #12 - #10 AWG .156 / 3.9 F/M Pairs TAP SPLICES • Secure connections without stripping wire. • Rated at 600 Volt Max. • Temperature rating: 221˚ F (105˚ C). Part # Color Pack Qty. Wire Range 20-2218 Red 5/clam #22 - #18 AWG 20-100 Blue 5/Clam #16 - #14 AWG 21-100 Blue 5/Clam #16 - #14 AWG 10-100 Blue 25/Clam #16 - #14 AWG 20-1210 Yellow 3/Clam #12 - #10 AWG 20-141M, 20-143M & AMT-145M 20-161P, 20-1636 & 15-162P 20-2218 20-100 20-1210
nVent.com/GardnerBender | 23 Terminals & Wire RING TERMINALS - VINYL INSULATED • Rated at 600 Volt Max. • Temperature rating: 167˚ F (75˚ C). Length (L) Width (W) Barrel I.D. (C) Part # Color Pack Qty. Inches MM Inches MM Inches MM Wire Range Stud Size 15-2214 Red/Blue 14/Clam .69 - 7 17.5 - 17.8 .15 - .26 3.7 - 6.6 .067 - .091 1.7 - 2.3 #22 - #14 AWG 4 to 6 15-101 Red 10/Clam 0.69 17.5 0.15 3.7 0.067 1.7 #22 - #16 AWG 4 to 6 21-101 Red 10/Clam 0.69 17.5 0.15 3.7 0.067 1.7 #22 - #16 AWG 4 to 6 15-102 Red 10/Clam 0.82 20.8 0.21 5.3 0.067 1.7 #22 - #16 AWG 8 to 10 20-101 Red 22/Clam 0.69 17.5 0.15 3.7 0.067 1.7 #22 - #16 AWG 4 to 6 20-102 Red 22/Clam 0.82 20.8 0.21 5.3 0.067 1.7 #22 - #16 AWG 8 to 10 10-102 Red 100/Clam 0.82 20.8 0.21 5.3 0.067 1.7 #22 - #16 AWG 8 to 10 21-1055 Blue 7/Clam 1.2 30.5 0.54 13.6 0.091 2.3 #16 - #14 AWG 5/16 in (7.9 mm) to 3/8 in (9.5 mm) 15-103 Blue 10/Clam 0.7 17.8 0.26 6.6 0.091 2.3 #16 - #14 AWG 4 to 6 15-104 Blue 15/Clam 0.86 21.8 0.37 5.3 0.091 2.3 #16 - #14 AWG 8 to 10 20-105 Blue 17/Clam 1.06 26.8 0.47 12 0.091 2.3 #16 - #14 AWG 12 to 1/4 in (6.3 mm) 20-103 Blue 22/Clam 0.7 17.8 0.26 6.6 0.091 2.3 #16 - #14 AWG 4 to 6 20-104 Blue 22/Clam 0.86 21.8 0.37 5.3 0.091 2.3 #16 - #14 AWG 8 to 10 75-104 Blue 75/Clam 0.86 21.8 0.37 5.3 0.091 2.3 #16 - #14 AWG 8 to 10 10-103 Blue 100/Clam 0.7 17.8 0.26 6.6 0.091 2.3 #16 - #14 AWG 4 to 6 10-104 Blue 100/Clam 0.86 21.8 0.37 9.5 0.091 2.3 #16 - #14 AWG 8 to 10 10-105 Blue 100/Clam 1.06 26.8 0.47 12 0.091 2.3 #16 - #14 AWG 12 to 1/4 in (6.3 mm) 21-109 Yellow 7/Clam 1.52 38.6 0.76 19.2 0.134 3.4 #12 - #10 AWG 7/16 in (11.1 mm) to 1/2 in (12.7 mm) 21-106 Yellow 8/Clam 1.02 26 0.37 9.5 0.134 3.4 #12 - #10 AWG 8 to 10 20-108 Yellow 13/Clam 1.34 34 0.59 15 0.134 3.4 #12 - #10 AWG 5/16 in (7.9 mm) to 3/8 in (9.5 mm) 20-106 Yellow 14/Clam 1.02 26 0.37 9.5 0.134 3.4 #12 - #10 AWG 8 to 10 20-107 Yellow 14/Clam 1.16 29.5 0.47 12 0.134 3.4 #12 - #10 AWG 12 to 1/4 in (6.3 mm) 15-106 Yellow 15/Clam 1.02 26 0.37 9.5 0.134 3.4 #12 - #10 AWG 8 to 10 15-107 Yellow 15/Clam 1.16 29.5 0.47 12 0.134 3.4 #12 - #10 AWG 12 to 1/4 in (6.3 mm) 15-108 Yellow 15/Clam 1.34 34 0.59 15 0.134 3.4 #12 - #10 AWG 5/16 in (7.9 mm) to 3/8 in (9.5 mm) 10-106 Yellow 50/Clam 1.02 26 0.37 9.5 0.134 3.4 #12 - #10 AWG 8 to 10 75-106 Yellow 50/Clam 1.02 26 0.37 9.5 0.134 3.4 #12 - #10 AWG 8 to 10 10-107 Yellow 50/Clam 1.16 29.5 0.47 12 0.134 3.4 #12 - #10 AWG 12 to 1/4 in (6.3 mm) 10-108 Yellow 50/Clam 1.34 34 0.59 15 0.134 3.4 #12 - #10 AWG 5/16 in (7.9 mm) to 3/8 in (9.5 mm) 15-095 Red 5/Card 1.14 29 0.32 8 0.177 4.5 #8 AWG 1/4 in (6.3 mm) 14-095 Blue 4/Card 1.61 40.8 0.472 12 0.228 5.8 #6 AWG 1/4 in (6.3 mm) 14-096 Blue 4/Card 1.71 43.5 0.63 16 0.228 5.8 #6 AWG 3/8 in (9.5 mm) 15-096 Blue 4/Clam 1.71 43.5 0.63 16 0.228 5.8 #6 AWG 3/8 in (9.5 mm) 14-097 Blue 4/Card 2.05 52 0.87 22 0.228 5.8 #6 AWG 1/2 in (12.7 mm) 14-098 Yellow 4/Card 1.79 45.5 0.65 16.5 0.512 13 #4 AWG 3/8 in (9.5 mm) 15-098 Yellow 4/Clam 1.79 45.5 0.65 16.5 0.512 13 #4 AWG 3/8 in (9.5 mm) 14-099 Yellow 4/Card 2.15 54.5 0.87 22 0.303 7.7 #4 AWG 1/2 in (12.7 mm) SPADE TERMINALS - VINYL INSULATED • Vinyl-Insulated Barrel. • Rated at 600 Volt Max. • Temperature rating: 167˚ F (75˚ C). Length (L) Width (W) Barrel I.D. (C) Part # Color Pack Qty. Inches MM Inches MM Inches MM Wire Range Stud Size 15-2216 Red/Blue 14/Clam 0.83 21 0.37 9.5 .067 - .091 1.7 - 2.3 #22 - #14 AWG 8 to 10 15-111 Red 10/Clam 0.83 21 0.025 6.4 0.067 1.7 #22 - #16 AWG 4 to 6 15-112 Red 10/Clam 0.83 21 0.37 9.5 0.067 1.7 #22 - #16 AWG 8 to 10 20-111 Red 20/Clam 0.83 21 0.025 6.4 0.067 1.7 #22 - #16 AWG 4 to 6 20-112 Red 20/Clam 0.83 21 0.37 9.5 0.067 1.7 #22 - #16 AWG 8 to 10 75-111 Red 75/Clam 0.83 21 0.025 6.4 0.067 1.7 #22 - #16 AWG 4 to 6 10-112 Red 100/Clam 0.83 21 0.37 9.5 0.067 1.7 #22 - #16 AWG 8 to 10 15-113 Blue 10/Clam 0.83 21 0.24 6 0.091 2.3 #16 - #14 AWG 4 to 6 15-114 Blue 15/Clam 0.83 21 0.37 9.3 0.091 2.3 #16 - #14 AWG 8 to 10 20-113 Blue 20/Clam 0.83 21 0.24 6 0.091 2.3 #16 - #14 AWG 4 to 6 20-114 Blue 20/Clam 0.83 21 0.37 9.3 0.091 2.3 #16 - #14 AWG 8 to 10 75-113 Blue 75/Clam 0.83 21 0.24 6 0.091 2.3 #16 - #14 AWG 4 to 6 10-113 Blue 100/Clam 0.83 21 0.24 6 0.091 2.3 #16 - #14 AWG 4 to 6 10-114 Blue 100/Clam 0.83 21 0.37 9.3 0.091 2.3 #16 - #14 AWG 8 to 10 20-116 Yellow 14/Clam 1 25.5 0.35 9 1.31 3.4 #12 - #10 AWG 8 to 10 15-116 Yellow 15/Clam 1 25.5 0.35 9 1.31 3.4 #12 - #10 AWG 8 to 10 75-116 Yellow 50/Clam 1 25.5 0.35 9 1.31 3.4 #12 - #10 AWG 8 to 10 10-116 Yellow 50/Clam 1 25.5 0.35 9 1.31 3.4 #12 - #10 AWG 8 to 10 20-102, 20-106 & 20-104 20-114, 20-116 & 15-111
24 | nVent.com/GardnerBender Terminals & Wire TERMINAL BLOCKS • Rated at 30 Amp/600 Volt Max. • Temperature rating: –40˚ to 260˚ F (–40˚ to 130˚ C). • Wire range 22-10 AWG. • Accepts #8 stud size. UNDERGROUND BUTT SPLICE KIT (#14 - #8 AWG) TERMINAL BLOCKS UNDERGROUND SPLICE KITS Part # Color Pack Qty. Wire Range # of Circuits GTB-406 Black 1/Clam #22 - #10 AWG 6 GTB-408 Black 1/Clam #22 - #10 AWG 8 GTB-410 Black 1/Clam #22 - #10 AWG 10 Part # Color Description Pack Qty. Wire Range HST-WP Black 8 in (20.3 cm) Heavy-Wall Polyolefin Heat-Shrink Tubing with Watertight Adhesive Liner & 4 Screw Splice Connectors 1 #14 - #8 AWG Used for waterproof repair of well pipe cables and splices of stranded cable #14 - #8 AWG. • .4 in (10.1 mm) ID heat shrink tube. • 1/4 in (6.3 mm) Ø x 1-1/4 in (31.7 mm) brass butt splice. • Rated at 600 Volt Max. UNDERGROUND UF SPLICE KIT Part # Color Description Pack Qty. Wire Range HST-1300 Black 4 in (10.1 cm) Heavy-Wall Potlyolefin Heat-Shrink Tubing with Watertight Adhesive Liner & 1 Screw Splice Connectors 1 #14 - #8 AWG Accommodates waterproof splicing of #14 - #8 AWG UF copper wire. • Connector set screws engage each wire securely for a solid splice. • Minimum conductor size 14/2 with ground. • Maximum conductor size 8/3 with ground. • Rated at 600 Volt Max. UNDERGROUND BUTT SPLICE KIT (#8 - #2 AWG) Part # Color Description Pack Qty. Wire Range HSB-28 Black 4 in (10.1 cm) Heavy-Wall Polyolefin Heat-Shrink Tubing with Watertight Adhesive Liner & 1 Screw Splice Connectors 1 #8 - #2 AWG Used for waterproof installation or repair of #8 - #2 AWG copper cable. • 3/4 in (19 mm) ID heat shrink tube. • 1/2 in (12.7 mm) Ø x 1-1/2 in (38.1 mm) brass butt splice. • Eliminates messy epoxies, tapes or mastics. • Rated at 600 Volt Max.
nVent.com/GardnerBender | 25 Terminals & Wire MEDIUM DUTY CHARGING CLIPS Designed for battery chargers and testing equipment applications. • Nickel-plated steel. • PVC insulated grips with color identification. HEAVY DUTY CHARGING CLIPS Designed for battery chargers and testing equipment applications. • Made from Nickel-plated steel. • Available in multiple sizes. CHARGING CLIPS ALLIGATOR CLIPS Multi-purpose alligator clips for home, auto and marine applications. • Made from Nickel-plated steel. • Available with PVC insulating sleeve or insulated barrel. Part # Color Pack Qty. Insulation Type Length Amperage Wire Range Material 14-075 Silver 10/Card Non-insulated 1-1/4 in (3.1 cm) 5A #22-#18 AWG Nickel-plated Steel 14-076 Silver 4/Card Non-insulated 2 in (5.0 cm) 10A #22-#16 AWG Nickel-plated Steel 14-077 Red/Black 2/Card PVC insulated Barrel 2 in (5.0 cm) 10A #22-#16 AWG Nickel-plated Steel 14-078 Red/Black 2/Card PVC insulated 2 in (5.0 cm) 10A #22-#16 AWG Nickel-plated Steel Part # Color Pack Qty. Insulation Type Length Amperage Wire Range Material 14-610 Red/Black 2/Card PVC insulated 2 in (5.0 cm) 10A #16-#14 AWG Nickel-plated Steel 14-630 Red/Black 2/Card PVC insulated 3 in (7.6 cm) 30A #18-#10 AWG Nickel-plated Steel Part # Color Pack Qty. Insulation Type Length Amperage Wire Material 14-505 Silver 4/Card Non-insulated 1-11/16 in (4.2 cm) 5A 22-18 AWG Nickel-plated Steel 14-510 Silver 4/Card Non-insulated 2 in (5.0 cm) 10A 16-14 AWG Nickel-plated Steel 14-520 Silver 2/Card Non-insulated 2-13/16 in (7.1 cm) 20A 16-12 AWG Nickel-plated Steel 14-530 Silver 2/Card Non-insulated 3 in (7.6 cm) 30A 18-10 AWG Nickel-plated Steel 14-550 Silver 1/Card Non-insulated 4-1/4 in (10.7 cm) 50A 8 AWG max Nickel-plated Steel
26 | nVent.com/GardnerBender Terminals & Wire TIN PLATED COPPER PRIMARY WIRE Tinned copper wire provides maximum protection against corrosion and electrolysis. • Ultra-flexible (Type 3) stranding. • Resists salt water, battery acid, oil, gasoline and UV radiation. • Insulation is heat and abrasion-resistant. • Packaged in small spools. • Rated to 600 Volt Max. • Temperature rating: 221° F (105° C). PRIMARY WIRE Part # Color Pack Qty. Wire Gauge Length AMW-318 Black 1 #18 AWG 35 ft / 10.66 m AMW-328 Red 1 #18 AWG 35 ft / 10.66 m AMW-338 White 1 #18 AWG 35 ft / 10.66 m AMW-316 Black 1 #16 AWG 25 ft / 7.62 m AMW-326 Red 1 #16 AWG 25 ft / 7.62 m AMW-336 White 1 #16 AWG 25 ft / 7.62 m AMW-314 Black 1 #14 AWG 18 ft / 5.48 m AMW-324 Red 1 #14 AWG 18 ft / 5.48 m AMW-334 White 1 #14 AWG 18 ft / 5.48 m AMW-312 Black 1 #12 AWG 12 ft / 3.65 m AMW-322 Red 1 #12 AWG 12 ft / 3.65 m AMW-332 White 1 #12 AWG 12 ft / 3.65 m Stud Size Diameter US #2 0.086 in (2.144 mm) #4 0.112 in (2.844 mm) #6 0.138 in (3.505 mm) #8 0.164 in (4.166 mm) #10 0.190 in (4.826 mm) 1/4 in (6.3 mm) 0.250 in (6.350 mm) 5/16 in (7.9 mm) 0.3125 in (7.938 mm) 3/8 in (9.5 mm) 0.375 in (9.525 mm) 7/16 in (11.1 mm) 0.4375 ( 11.113 mm) 1/2 in (12.7 mm) 0.500 in (12.700 mm) 9/16 in (14.2 mm) 0.5625 in (14.287 mm) SIZE CHART Disconnect Tab Size US 0.110 in (2.7 mm) 0.187 in (4.7 mm) 0.250 in (6.3 mm) Stud Size US 0.157 in (3.9 mm) 0.197 in (5.0 mm)
nVent.com/GardnerBender | 27 Terminals & Wire VINYL INSULATED TERMINAL KITS TERMINALS KITS AND ASSORTMENTS Part Number Description Qty TK-806 Ring and Spade Terminals, Butt Splices, and Male/Female Disconnects 100 TK-175 Ring and Spade Terminals, Butt Splices, and Male/Female Disconnects 175 TK-40 Ring and Spade Terminals, Butt Splices, and Female Disconnects 40 TK-1210 Ring and Spade Terminals, Butt and Bullet Splices, and Male/Female Disconnects 28 TK-1614 Ring and Spade Terminals, Butt Splices, and Male/Female Disconnects 46 TK-1822 Ring and Spade Terminals, Butt and Bullet Splices, and Male/Female Disconnects 46 10-170 Ring and Spade Terminals, Butt Splices, and Male/Female Disconnects 100 Vinyl insulated kits that contain various popular terminal connectors with a multitude of stud sizes and covering the wire ranges of 22-16, 16-14, and 12-10 AWG. TK-806 TK-175 TK-40 TK-1210 TK-1614 TK-1822 10-170 *See Appendix A for full listing of product contained within each kit. Pg. 156
RkJQdWJsaXNoZXIy MjgzMDI=