60 | nVent.com/GardnerBender Wire Management DS-130 DUCT SEAL COMPOUND Seals conduit openings against drafts, dust, moisture, and noise. • Protects terminal boxes, pot heads and bushings from corrosive elements. • Deadens switch gear panel noise. • Dough-like compound is easily "thumbed" over holes and gaps. • Will not harden or form a skin under normal conditions. • Excellent resistance to water, alcohols, mild acids and bases. • No Silicone. • Specifications: - Viscosity: ASTM D-217 300-gram load - 7.0 –11.0; ASTM DS-S2 100-gram load - 9.0 –15.0. - Temperature Range: Adheres at –20° F (–29° C). Will not slump after 1 hr. at 350° F (175° C). - Flash Point: Over 550° F (285° C). - Other Properties: Non-conducting, non-deteriorating, non-toxic, non-corrosive, non-staining, non-curable; 99% solid, coil-based. Part # Pack Qty. Description Color DS-110N 9 pugs 1 lb (0.4 kg) pugs Gray DS-130 30 pugs 1 lb (0.4 kg) pugs Gray DS-530 6 pugs 5 lb (2.2 kg) pugs Gray SPACERS nVent GARDNER BENDER Spacers will bring outlet receptacles and switches flush with drywall or paneling to allow a proper fit with wall and face plates. • Each spacer is 1/4 in (6.3 mm) thick, fold over and stack or twist apart for desired thickness. • Self-extinguishing. Part # Pack Qty. Description Color GSP-04 4 strips of 8 spacers/bag Outlet Spacers Red GSP-24 24 strips of 8 spacers/bag Outlet Spacers Red GSP-04 Part # Pack Qty. Description Color 800 25 sets/box Box Support Set Silver BOX SUPPORTS 800 • Screwless support for ease of use. • Saves time for installing outlet or switch boxes by: 1. Mark corners of box position and drill four 1/2 in (12.7 mm) holes. 2. Saw between holes to make box opening. 3. Place box into opening. Slip box supports into openings alongside box; one with long end up, the other down. 4. Bend fingers of box supports into box while firmly pressing box against wall.
RkJQdWJsaXNoZXIy MjgzMDI=