90 | nVent.com/GardnerBender Hole Making Part # Description Weight SP3500 35-ton Steel Punch Set 40 lbs / 18.1 kg *Set Include: Part # Description Weight SPD-563 9/16 in Punch & Die Set 1 lb / 0.4 kg SPD-688 11/16 in Punch & Die Set 1 lb / 0.4 kg SPD-813 13/16 in Punch & Die Set 1 lb / 0.4 kg 35-TON HYDRAULIC PUNCH • Punches clean, burr-free bolt and small conduit holes in mild steel plates, beams, railings, bus bars or angle iron up to 1/2 in / 1.2 cm thick. • Portable or fixed applications. Lift and position with easy-carry handle or mount for production setups. Height 13 3/4 in / 34.9 cm weight 35 lbs / 15.8 kg. • Four punch and die sets included for round holes 7/16 in - 13/16 in / 1.1 cm - 2 cm diameter (gives clearance for 3/8 in, 1/2 in, 5/8 in or 3/4 in [9.5 mm, 12.7 mm, 15.8 mm or 19 mm] bolts or conduit) plus die changeover tool set. Throat depth 3 in / 7.6 cm. • Holding plates grip work while punching to prevent binding and clamp punch in place to free operator’s hands. SP3500 PH20 Pump Type Single-Speed Usable Oil Capacity - in3 / cm3 20 / 50.8 Pressure Rating 1st stage (psi) – 2nd stage (psi) 10,000 Oil Displ. per Stroke 1st stage - in3 / mm3 – 2nd stage - in3 / mm3 .055 / 1.3 Max. Handle Effort 72 lbs / 32.6 kg Dimensions - in / cm A 7.31 / 18.5 B 13.25 / 33.6 C 1.13 / 2.8 D 3.37 / 8.5 E 1.13 / 2.8 F – H 12.56 / 31.9 J .75 / 1.9 L 5.63 / 14.3 M – N 3.75 / 9.5 P 3.18 / 8 Q – R – S – T – Weight 4.5 lbs / 2 kg MANUAL HYDRAULIC PUMP Utilized with nVent GARDNER BENDER hydraulic bender sets. • Economical single-speed design. • Contains internal high-pressure relief overload protection. Manual Pump PH20 E G P N J Release Valve D A C M L H B S PH20
RkJQdWJsaXNoZXIy MjgzMDI=