Del City 2022 Catalog

circuit breakers 137 Scan for pricing or go to www.delcity.net/ catalogpricing f:1.800.431.1293 1.800.654.4757 Gasket for Panel Mount Circuit Breaker Gasket wraps around breaker to provide a seal between the circuit breaker housing and the panel it is being installed into. 800275 Type 3 – Manual Reset (switchable) These breakers will trip (lever extends to the open position) under a thermal over current condition and remains tripped until the lever is manually reset, closing the circuit. This series also offers the unique feature of a push-to-trip button, allowing you to manually disconnect the circuit. Each breaker is rated up to 42V DC. 76205 Hi-Amp Panel Mount Circuit Breakers Breakers are compliant with SAE J1625 and carry a circuit interrupt protection rating of 3,000A at 30V DC per ABYC E-11. Body is made of UL-rated 94V-0 thermoset plastic and cover is made from 94V-0 thermoplastic with an elastomer over mold and gasket to provide it with a weatherproof IP66 rating. Mounting holes are .260" clearance and power studs are 1/4"-28 threaded studs (nuts included). Operating temperature: -40°C to 85°C (-40°F to 185°F). Type 1 – Automatic Reset These breakers will continuously cycle during a thermal over current condition. Each breaker is rated up to 30V DC. 76305 type 1 type 3 amp 76365 — 60 76305 76205 100 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. PN description 8000275 gasket WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. TYPE 1 – Automatic Reset Will recycle continuously during an overcurrent condition. The composite alloy material will deflect and separate the contacts when an over-current situation occurs and returns to the run mode as it cools. The process will continue until the source of the overcurrent is removed or corrected. TYPE 3 – Manual Reset Circuit breaker will remain tripped (in the OFF position) until indicator button or lever is manually reset to activate circuit. Type 3 available in plastic only. TYPE 2 – Modified Reset Circuit breaker will remain tripped (in the OFF position) as long as there is power to the circuit. Contains internal resistor. Reset circuit breaker by turning off the circuit or by turning off the ignition switch. FUNCTION CODE Type 1 – Automatic Reset These breakers will continuously cycle during a thermal over current condition. Hi-Amp Surface Mount Circuit Breakers Breakers are compliant with SAE J1625 and carry a circuit interrupt protection rating of 3,000A at 30V DC per ABYC E-11. Body is made of UL-rated 94V-0 thermoset plastic and cover is made from 94V-0 thermoplastic with an elastomer over mold and gasket to provide it with a weatherproof IP67 rating. Mounting holes are .260" clearance and power studs are 1/4"-28 threaded studs or 3/8" - 16 threaded studs (nuts included). Operating temperature between -25°F to 180°F. PN amp stud size rating 76401 25 1/4" 30V DC 76402 30 76403 40 79404 50 76405 60 76406 70 76408 80 76410 90 76415 100 76420 120 76430 150 77052 25 3/8" 32V DC PN amp stud size rating 77053 30 3/8" 32V DC 77054 40 77059 50 77060 60 77061 70 77089 80 77062 90 77090 100 77091 120 77092 150 77093 175 77094 200 76415 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

RkJQdWJsaXNoZXIy MjgzMDI=