Del City 2022 Catalog

relays 184 Scan for pricing or go to catalogpricing Hi-Amp, Bi-Stable Relays These relays will support your remote power switching applications that require high continuous current passage, large engine starting needs and high ambient temperatures. These relays help reduce cost and save weight by eliminating the need to route heavy copper cables directly to loads with the relay positioned close to the battery or in-line with the desired cable routing allowing you to remotely control the unit with a fine wire harness. Ideally suited for heavy duty trucks, construction, agricultural equipment or heavy duty lighting equipment. The compact footprint design saves space in your installation. A 12-way connector and terminals are required to complete the installation of these relays (connector: 67072; terminals 67073 or 67074). Operating Temp: -40° C to 85° C. Ingress Protection: IP66/IP69K. RoHS and CE Rated. Mounting Hardware (counter-bore mounting holes) M6 or ¼”. Bi-stable internal mechanism draw no current in the on or off state saving your batteries voltage supply. Operational Vibration: 8 G. High-Amp Terminal Hardware M10-1.4 Serrated Flange Nut (15 mm hex socket). Supports US DOT 11579 and EU ADR requirements for hazmat vehicle compliance. Hi-Amp, Bi-Stable Relay Accessories PN circuit type amp max. voltage 67070 single pole, continuous 600A 12V 67071 dual pole, continuous 300A 12V PN circuit type 67072 12-way MOLEX sealed female connector 67073 16-18 ga female terminal* 67074 20-22 ga female terminal* 67070 67072 67073 67074 *order min 6 WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm Song Chuan Hi-Amp Relay This single pole, normally open hi-amp automotive relay can switch up to a 200A resistive load. Ideal for use with large draw items or components such as pumps, motors or winches. It can power sub-panels or multiple circuits. This relay was engineered to deliver a superior performance over a long life. Coil parallel with resistor 1/2W for 12V 680Ω. Operating Ambient Temperature: -40°C to +75°C. Mechanical Life - No Load = 1,000,000 Operations. Dielectric Strength Between Open Contact: AC 1000V, 50/60Hz 1 min. Between Contact and Coil: AC 1000V, 50/60Hz 1 min. Contact Material: Ag Alloy. RoHS Compliant. PN circuit type amp max. voltage 74952** SPST NO 200A 12V DC 74953** 24V DC 74996* 12V DC 74996 WARNING: Cancer and Reproductive Harm Diode (IP54 Rated)/Resistor (IP67 Rated) eliminates voltage spikes which can damage sensitive electronic equipment. *Resistor **Diode Change over relays are used in applications that require Change Over Relays, Normally Open Relays or Normally Closed Relays. Hi-Amp Relays