Del City 2022 Catalog

solenoids 190 Scan for pricing or go to www.delcity.net/ catalogpricing www.delcity.net info@delcity.net m-LVD Low Voltage Disconnect Senses low voltage and disconnects non-critical loads to save power for engine starting. Includes Remote Control Switch. Intermittent Rating: 5 minutes, 115A. Remote Control Switch: (On)-Off-(On). Meets ISO 8846 and SAE J1171 external ignition protection requirements. m-ACR Automatic Charging Relay w/Optional Start Isolation Automatically combines batteries during charging, isolates batteries when discharging and starting engines. Senses charging on two battery banks, case design allows surface, rear or front panel mounting options. Integrated LED indicates ACR states. CE Marked, ISO 8846. Meets SAE J1171 external ignition protection requirements. IP67. BatteryLink™ ACR Automatic Charging Relay w/Optional Auxiliary Battery Priority Automatically shares single source of charge with Auxiliary Battery. Senses charging on two battery banks. Side and bottom knockouts for cable connections. Studs accept multiple cable terminals. One-piece stainless flange nuts ensure safe and secure connections. Integrated LED indicates ACR status. Quick connect terminals. CE marked, ISO 8846. Meets UL 1500 and SAE J1171 external ignition protection requirements. IP67. PN voltage continuous rating coil function terminal stud disconnect voltage reconnect voltage cable size 75980 12V DC 65A DC normally open 1/4"-20 (M6) 11.3V-12.1V 13V DC 6 AWG (16mm²) PN voltage continuous rating coil function terminal stud amperage max. battery max cable size 75982 12V/24V DC 120A DC normally open 3/8"-16 (M10) 15mA. (open) 850 CCA 1/0 AWG (50mm²) PN voltage continuous rating coil function terminal stud operating current terminal stud max cable size 75981 12V/24V DC 65A DC normally open 1/4"-20 (M6) 90mA. (Open) 1/4" 20(M6) 1/0 AWG (50mm²) PN voltage continuous rating coil function terminal stud amperage max. battery cable size 75983 12V/24V DC 120A DC normally open 3/8"-16 (M10) 15mA. (open) 850 CCA 1/0 AWG (50mm²) SI-ACR Automatic Charging Relay w/Optional Start Isolation Automatically combines batteries during charging, isolates batteries when discharging and when starting engines. Senses charging on two battery banks, side and bottom knockouts for cable connections. CE marked, ISO 8846. Meets UL 1500 and SAE J1171 external ignition protection requirements. IP67 - protected against immersion up to 1 meter for 30 minutes. ML-Series Automatic Charging Relays Offer a 500 Amp magnetic latching (bi-stable) relay that automatically combines batteries during charging and isolates batteries when discharging and starting engine. ML-Coil Function: Bi-Stable. Amperage Operating Current-continuous: < 13mA. CE marked, meets ISO 8846 and SAE J1171 external ignition protection requirements. IP66. part no. amp coil volts manual control terminal stud stud length live current switching 75984 500 12V DC no 3/8"-16 7/8" (22mm) 300A@12V DC 75985 500 12V DC yes 3/8"-16 7/8" (22mm) 300A@12V DC 75986 500 24V DC no 3/8"-16 7/8" (22mm) 300A@12V DC 75987 500 24V DC yes 3/8"-16 7/8" (22mm) 300A@12V DC 75988 500 — paralleling link bus 3/8"-16 7/8" (22mm) 300A@12V DC WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov. WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov. WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov. WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov. WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov. WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov. Blue Sea Systems L-Series Continuous Solenoid Blue Sea Systems L-Series Solenoid hermetically sealed contacts and vaporproof design are used for 12 or 24 Volt systems. Ignition Protection allows for a safe installation aboard gasoline powered boats. Features an integrated coil control that minimizes heating and amperage draw. Continuous Rating: 450 Amp max. Intermittent Rating: 600 Amp max. Control Circuit Connection: 20 AWG Tinned Wire. CE marked, IP67 Rated, UL 508, SAE J1171 Marine. PN connection type number of connections stud size circuitry amps weather proof contacts voltage 67046 studs 2 5/16" SPST 250 IP67 NO 12/24V DC

RkJQdWJsaXNoZXIy MjgzMDI=