Del City 2022 Catalog

solenoids 191 Scan for pricing or go to catalogpricing f:1.800.431.1293 1.800.654.4757 WARNING: Cancer and Reproductive Harm Blue Sea Systems 12V Automatic Timer Disconnect Blue Sea Systems 12V Automatic Timer Disconnect can manage batteries in four main functions: timer disconnect, low voltage disconnect, automatic charging relay and a solenoid. The Timer Disconnect signal triggers relay to connect battery power to devices. When the signal is removed, the timer is activated and will disconnect devices after a preset time. Timer ranges from 15 minutes to 4 hours. Optional charge sense can be used instead of 12V signal to reduce wiring. Test mode disconnects devices after 5 seconds to confirm relay and timer are operational. The Low Voltage Disconnect senses low battery voltage and automatically connect devices to save power and can be used in conjunction with timer disconnect. The low voltage disconnect has an adjustable voltage setting at 11V, 11.5V or 12V. The low voltage will disconnect devices prior to preset time to preserve battery power. The Automatic Charging Relay combines two battery banks for charging off a single charging source. The automatic charging relay isolates batteries when the charging source is not present or discharging. The single side sensing design only monitors the voltage of the start battery. The automatic charging relay is ideal for auxiliary batteries that are AGM or larger than the start battery. The solenoid's 12V signal will connect or disconnect relay without any time delay. CE marked, Meets ISO 8846 and SAE J1171 external ignition protection requirements. IP67protected against immersion up to 1 meter for 30 minutes. PN voltage amperage coil function 75989 Nominal: 12V DC. Input: 9.5-16V 120A (continuous) 210A (intermittent: 5 min.) normally open amp operating current terminal stud terminal stud torque cable size max cable size 175mA (combined) 4mA (open) 3/8"-16 (M10) 140 in-lb (15.82 Nm) 1 AWG (50mm²) 1/0 AWG (50mm²)