Del City 2022 Catalog

terminals 73 Scan for pricing or go to www.delcity.net/ catalogpricing f:1.800.431.1293 1.800.654.4757 INFORMATION Electrical Crimp Mechanical Crimp Insulated Terminals & Connectors Correct crimping is important to assure a strong connection. Non-insulated Terminals & Connectors Indent should be opposite the barrel seam. incorrect correct Non-insulated terminals are the most economical and are used where special performance or insulation characteristics are not necessary. Insulated terminals are used where an insulated barrel is necessary and desirable. Industry standard color coding of insulation indicates proper wire gauge. Strip Length: 1/4" Insulation Temperature: 105°C (221°F) Voltage: 600V maximum, building wire; 1000V maximum, signs and fixtures. Tools: Follow manufacturing crimping instructions (one crimp only). Caution: Appropriate electrical codes must be followed in all electrical work. Power must be off prior to installation and removal of wire connectors. Notice: Sellers and manufacturers only obligation shall be to replace such quantity of the product proved to be defective. Neither seller or manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use of or the inability to use the product. INSTALLATION PROCEDURE: Funnel Barrel Feature provides an excellent electrical and mechanical connection: 1. Funnel design guides wire into position. 2. No wire strand hang-up as the wire is inserted, giving a fast, positive installation. 3. Wire is in place, ready for crimping. For maximum crimping performance, the barrel of connector must be properly indexed in the crimp tool station. Comparison Chart gauge range crimp, heat shrink crimp, nylon, heat shrink solder, heat shrink crimp, solder, heat shrink nylon- sealant filled nylon w/ brass sleeve standard nylon vinyl high- temp iron non- insulated insulated twin insulated Bullet 22-14 X — — — — X X X — — — — Butt 26-4 X X X* X* X X X X X X — — Parallel Connectors 22-6 — — — — — — — — — X — — Push-on 22-10 X — X* X* — X X X X X — — Spade 22-10 X — — — — X X X X X — — Ring 22-2 X — X* X* — X X X X X — — Star Ring 22-14 — — — — — — — X — X — — Flag Ring 16-4 — — — — — — — — — X — — Hook 22-10 — — — — — — X — — X — — Specialty 22-10 X — — — — X X X — X — Wire Ferrules 24-2 — — — — — — — — — X X X X annotates option is available — annotates option is not available * Lead-Free Bullet Butt Push-on Spade Star Ring Hook Flag Ring Ring Specialty STUD SIZE HEAT SHRINK INSTALLATION 4 6 8 10 1/4" 5/16" 3/8" 1/2"

RkJQdWJsaXNoZXIy MjgzMDI=