mastervolt.us DIGITAL CONTROL & MONITORING 84 MasterBus Tank Level Interface This interface converts analog sensor input signals to MasterBus data. Selectable input signals: 4-20 mA, 0-300 Ω, 8-70V DC. Part # 77030300 MasterBus Power Interrupter The MasterBus Power Interrupter switches off parts of the MasterBus network. This reduces the no-load consumption and is useful if a large system will not be used for an extended period. Part # 77031550 AC Power Analyser The AC Power Analyser is a multifunctional measuring device which can visualize the AC current and AC voltage, frequency, Cos Phi and power inside the system. Can also be used as MasterBus interface for the Mass Sine Inverter series, and offers a free programmable potential-free contact. Use it to connect AC power devices such as generators or isolation transformers to the MasterBus network. Part # 77031200 MasterBus Repeater The MasterBus Repeater doubles the maximum length of your MasterBus network. Part # 77031100 Specifications for MasterBus Interfaces on page 85. Multipurpose Contact Output This potential-free programmable contact can be customized and programmed to give your MasterBus network unprecedented possibilities. Use it, for example, to control a ventilator, or to operate a generator. Potential free contact: NO-C-NC – 1 A/ 30 V DC Part # 77030500 PRO PRO PRO PRO PRO Digital AC 1x6A Switches all AC loads, no matter where they are. Loads up to 6A can be directly switched, higher loads should be switched via an external relay. Part # 77031500 PRO CZone® MasterBus Bridge Interface The CZone MasterBus Bridge Interface physically connects the MasterBus and CZone networks together, enabling the two networks to communicate and act as one. This provides seamless control and monitoring of Mastervolt power electronics from CZone displays or partner products. Part # 80-911-0072-00
RkJQdWJsaXNoZXIy MjgzMDI=