18 / 20
FIVE YEAR
WARRANTY
INCLUDED
Digital
Pro
Mar
FailSafe Technology with
Peace of Mind Dependability...
The ProSafe FS Series of FailSafe 30 and 60 Amp Galvanic Isolators
will interrupt galvanic current flow with other boats at a marina when
installed on a boat which is connected to AC Shore Power. This
technology maintains AC safety ground and solves the most common
forms of corrosion and premature zinc loss within a boats bonding
system. The ProSafe FS Series is UL Certified to meet the parameters
of the ABYC A-28 recommendation ProSafe FS installs easily and
does not require a dedicated monitor to verify the operational status
of the galvanic isolator as required by non FailSafe Certified galvanic
isolators. Both the ProSafe 30 and 60 Amp models are built on
robust Flat Pack Semiconductor platforms, ensuring that in the event
of a failure, the failure is safe by not compromising the ground
continuity on-board when connected to AC Shore Power.
ABYC A-28 July ’08 Compliant and Fail Safe Certified
Certified by Underwriters Laboratories (UL). Insures shore power safety ground wire
is maintained through the isolator.
Flat Pack High Power Semiconductors
Robust high power diodes allow the FS Series to meet the new FailSafe criteria
for conducting inrush currents 3,000 and 5,000 amps (FS30 and FS60 respectively)
for the required duration period.
Innovative Design
The FS60 will cool itself in the event it must conduct current insuring cooler operation
in this mode.
Ignition Protected
Meets ISO 8846 and either model can be mounted within
an engine compartment.
Gold Plated Terminations
ProSafeFS Series
Galvanic Isolator
IP66
ProSafe FS30
For 30 Amp Shore Cord Applications
ProSafe FS60
For (1) 50 Amp or (2) 30 Amp Shore Cord Applications
17
GALVANIC
ISOLATOR
3GF1
Simply install in your on board green safety ground wire (between your AC inlet and
your AC Panel) to separate your D.C. Bonding System from your Shore A.C Green wire.