2019 Mobile Catalog

32 POWER CONVERSION bluesea.com P12 Battery Chargers Four stage, three output, dry mount design, for use in harsh environments • Rugged, finned aluminum case • PreFloat™ stage prevents over charging • Power factor corrected for efficient use of AC • Intuitive diagnostic screens • User defined charge profiles and customizable settings • Provides charging for up to three battery banks • Large, bright display • Multi-language: English, French, German, Italian, Spanish • Charge Coordination with Blue Sea Systems Automatic Charging Relays (ACR) controls ACR state ensuring proper float stage for each battery • Battery Temperature Compensation - adjusts charge voltage based on battery temperature • AC over and under voltage shut down and automatic restart • Over and under battery temperature protection - charger will not operate if battery temperature rises above or falls below a set value • DC over voltage and reverse polarity protection • Surge and short circuit protection Specifications 7531 7532 Total Output Current 25A 40A Input AC Current 4.5A @ 115V AC 7.5A @ 115V AC 2.25A @ 230V AC 3.75A @ 230V AC Recommended 60Ah Minimum 60Ah Minimum Battery Bank Sizes* Example: 1 × Group 24 Example: 1 × Group 24 330Ah Maximum 440Ah Maximum Example: 3 × Group 31 Example: 4 × Group 31 Nominal Output Voltage 12V DC Output Connections 3 positive, 1 negative Universal AC Input Voltage 90V–265V AC Input Frequency Range 45–65 Hz Typical Float Voltage 13.5V DC Max. Available Voltage 16.0V DC Output Voltage Accuracy 0.05V DC Operating Temperature −20°C (−4°F) to 70°C (158°F) Storage Temperature −30°C (−22°F) to 80°C (176°F) Battery Types** Flooded, Gel, AGM, TPPL * Battery bank sizes are tested to California Energy Commission compliance (CEC). Larger and smaller size banks could charge well, but consume slightly more power over the charging cycle. ** Consult battery manufacturer specifications for other battery types to avoid damage. Do not mix battery types. Regulatory Designed and constructed for compliance to UL-1236 Marine, CSA 22.2 No. 107.2, and ABYC A-31 standards. Ignition Protection per ISO 8846, and SAE J1171. CE Certified. Meets FCC Part 15, Class B requirements. Designed and tested to comply with California Energy Commission (CEC) efficiency requirements, and ship with these settings by default. Part # Amps Volts Width in (mm) Height in (mm) Depth in (mm) 7531 25A 12V DC 8.46 (215) 13.00 (330.6) 4.30 (109) 7532 40A 12V DC 8.46 (215) 13.00 (330.6) 4.30 (109) SI ACR page 75 ML Series ACR page 70 bluesea.com/video 7532 PATENTED MRBF Fuse Block page 92 5YEAR WARRANTY Related Products