2019 Mobile Catalog

33 POWER CONVERSION bluesea.com Part # Description Width in (mm) Height in (mm) Depth in (mm) 7517 EV Charger Display 4.7 (119.25) 3.2 (80.5) 1.2 (29.7) 5YEAR WARRANTY EV Battery Charger Display Intuitive battery monitoring for emergency vehicles • Drop in replacement for traditional rectangular displays • Automatically detects 1-3 battery banks • AC charge indication verifies that power is connected and the battery charger is charging • Plain language fault indication relays if there is a fault with the battery charger • Dip switch selectable screen configuration allows the display to show voltage bar graphs or the P12 Battery Charger summary screen • Displays voltage bar graphs even when AC power is not present • Optional standby mode shuts off screen after 4 hours of inactivity • Automatic ON based on motion with integrated knock sensor • Bright, daylight readable, OLED display Specifications Display Size 55mm x 28mm Display Type Yellow OLED Input Voltage 6V–36V DC, reverse polarity protected Amperage Draw Maximum 50 mA Minimum < 1 mA in Standby Mode Standby Mode The 7517 has the option of a power saving Standby Mode which turns the display off after 4 hours of being stationary. It will resume normal function upon movement of the vehicle or by tapping the unit several times in succession. Accuracy: ± 1% at 36 Volts DC Number of Inputs: 3 battery inputs with common reference. Regulatory Monitor face is IP66 – protected against powerful water jets when installed according to instructions. P12 Charger Summary Screen Part # Description 7512 Mounting Adapter Battery Charger Mounting Adapter Easily mount any P12 ProNauticP Battery Charger without drilling new holes • For use with the P12 Battery Charger (page 32) or the ProNauticP Battery Charger (page 34) • Mounts directly into industry standard mounting holes from existing chargers • Integrated nuts allow battery charger mounting fasteners to be inserted from either the front or rear • Fasteners included with the P-12 Adapter plate: • Qty 4: #10-32 x 0.75” pan head machine screws • Qty 4: #10-32 Nylock Nuts