205 / 308
205
toll free 800.307.6702 MASTERVOLT | mastervolt.com MARINCO | marinco.com ANCOR | ancorproducts.com
Manage
|
Monitoring
Solenoid Valve
The SA296COMP-12V is suitable
for countries where VR2.2 is not
approved. The CE approved
SA296COMP-12V can be
installed by an approved
gas installer using approved
components from within specific
markets. 12V or 24V options
available. Uses 1/4" BSP thread.
Note: A separate regulator will need
to be installed with the SA296 valves.
Item # SA296COMP-12V
12V
Item # SA296COMP-24V
24V
600-GD, 600-GDL, & FD-2 Specifications
Voltage (V DC)
10–32
Current (mA)
350 max.
Alarm Sensitivity 20% lower explosive limit
Current@Out (mA) 800 max.
Solenoid (mA)
700 pulse, 250 hold
600-GDRV has the sensor mounted in the
front facia creating a stand alone unit. The
unit is designed to be surface mounted at
the vessel’s lowest point.
600-GDRV
600-LPG
FD-2 is designed for an economic
in-dash installation. Supplied with sensor
(5 m cable) which is capable of
detecting combustible gases.
FD-2
600-GD will detect LPG, Petrol and CNG
fumes. Supplied with one sensor, with
an option for a second sensor, Item #
BL-SL-L output for remote alarm and
blower unit. 600-GD can be used on
12 or 24V systems.
600-GD
Same features as the 600-GD, with the
ability to switch a valve on. It contains a
unique “Pulse & Hold” circuit within the
detector. This allows the valve to be pulled
in at 12V and then once energized it will
step down to hold the valve in place. This
reduces power consumption and heat while
the gas is turned on.
600-LPG is a stand alone gas shut-off
system with no gas detection ability. For
12V systems order VR2.2 separately. For
24V systems order VR2.2-24V.
600-GDL
VR2.2
Solenoid Valve &
Regulator Kit
Compatible with 600-GDL
Gas Detector or 600-LPG.
Solenoid voltage: 12 V or 24 V
Gas outlet: 3/8 BSP
Gas inlet: POL Thread
Current draw: 800 mA
Current draw with GDL or PH-12V: 0.2 A
Regulator Flow Rate: 3 kPa.
Gas Detectors
The BEP™ Detectors use microprocessor control to ensure correct sensor
sensitivity. The Detectors have the capability to control two sensors which
detect both LPG and Petrol, with visual and audible alarms.
• Dual sensors for LPG and Petrol
• Visual and audible alarms; provision
for external alarm
• Automatic shut-off solenoid control
with pulse and hold circuit for low
power draw (600-GDL only)
• Self-testing
• Provision of bilge blower
• 2.4"x3.5"x0.7"
(67x88x17 mm)
BL-SL-L
One Sensor lead supplied (5 m) with
GD & GDL.
Second Sensor lead ordered separately
Manage:
Monitoring–Gas Detectors
Note: The VR2.2 may not comply in some countries, and
does not comply with USCG requirements. Please check
with your local gas installer. Not for sale in the USA.