254 / 308
254
toll free 800.307.6702 MASTERVOLT | mastervolt.com MARINCO | marinco.com ANCOR | ancorproducts.com
Accessories:
Wiper Motors
Wiper Motors
The motor choice is based primarily on the size of the windshield
and where the motor is to be installed, either in an exterior or
interior location. Marinco
®
motors are split into three categories,
Standard, Heavy-Duty, and Heavy-Duty Plus, with the categories
being defined by the power range of the motors in those
categories. Within the three categories, there are motors
designed for interior or protected installations, and motors
designed for exterior installations. With the addition of the 3.0
motor, we offer wiper motors for all windshield sizes up to 45",
which could be covered by a 30" arm and 30" blade
combination, driven by a 3.0 motor.
The Standard motor category includes the STD, WMW, and
500, which are all designed for light duty use, defined as being
able to drive a 14" arm and a 14" blade. The differences in the
motors relate to their casings and the appropriate installation
applications. The STD is designed to be used in interior or well
protected locations. The WMW, with its chrome-plated brass
outer housing, provides protection for exterior installations that
have some protection. The 500 motor, with its thermoplastic,
watertight housing, is ideal for any light-duty, external installation
where the motor is constantly exposed to the elements.
When coverage of a larger windshield is required, Marinco offers
the Heavy-Duty motors, which are capable of driving a wide
range of arm and blade sizes, up to a 26" x 26" Deluxe arm and
blade combination, which would cover windshields up to 39" with
the 2.5 motor. The MRV is built for interior or well-protected
locations, and has the power to pull a 22" X 22" Deluxe arm and
blade combination. It has two speeds, with adjustable sweep set
and adjustable parking. The 1000 motor can pull up to a 16" x
16" Deluxe arm and blade combination. While not as powerful as
the MRV, it is waterproof, with the high-density thermoplastic
housing offering complete protection from the elements. The
1000 motor is a one-speed motor, with adjustable park and
adjustable sweep settings. The third motor in this category, the
1.5 motor has the power to pull a 22" x 22" Deluxe arm and blade
combination like the MRV, but is waterproof and built for exposed
installations. The 1.5 motor has a powder-coated aluminum base
and housing for greater operating efficiency and durability, with
two-speed operation, and adjustable park and sweep sets. The
fourth motor is the 2.5 motor and has the same features as the
1.5 motor (waterproof, powder-coated aluminum housing, etc.),
with the added power to drive a longer (26") Deluxe arm and
blade combination.
The 3.0 motor is the motor that makes up the Heavy-Duty Plus
category. A wiper motor for internal installations, the 3.0 motor
has an external linkage shaft drive that gives it the power and
torque to drive a 30" Premier pantographic arm and Premier
blade combination. See the following catalog pages for a full set
of specifications on this, and all of the other wiper motors.
Choosing the Right Motor
Model Voltage Speeds
Stall Torque/
Stall Current
Compatible
Blade Lengths
Available
Shaft
Lengths Sweep Angles
Housing
3.0
12 &
24V
single 165 in-lbs
12.5–14.5
amps
30" Premier Plus
single or
pantographic
2.5"
3.5"
Factory preset to 110°
Adjustable to 45°, 60°
external linkage
– no housing
2.5
12 &
24V
2 speed 139 in-lbs
9–10.5 amps
26" Deluxe
24" Premier
1.5"
2.5"
Factory preset:
80° or 110°
Adjustable: 45° or 60°
fully sealed
powder coated
aluminum
1.5
12 &
24V
2 speed 109 in-lbs
11.5–13 amps
22" Deluxe
20" Premier
1.5"
2.5"
Factory preset:
80° or 110°
Adjustable: 45° or 60°
fully sealed
powder coated
aluminum
1000
12V single 55 in-lbs
9.8–10 amps
16" Deluxe
18" Premier
1.5"
2.5"
Factory preset:
80° or 110°
Adjustable: 50°, 65°,
80° or 110°
fully sealed,
UV stabilized
hi-temp
thermoplastic
MRV
12 &
24V
2 speed
(but can be
operated
as 1)
109 in-lbs
11.5–13 amps
22" Deluxe
20" Premier
(at 80° sweep)
1.5"
2.5"
3.5"
Factory preset:
80° or 110°
Adjustable: 45°, 60°,
80°, or 110°
Corrosion
resistant cast
housing
500
12V single —
14" Deluxe
2.5"
Factory preset:
80° or 110°
fully sealed,
UV stabilized
hi-temp
thermoplastic
WMW
12V single —
14" Deluxe
2.5"
Factory preset: 110°
chrome plated
brass case
STD
12V single —
14" Deluxe
2.5"
3.5"
Factory preset:
80° or 110°
Adjustable: 80° or 110°
corrosion proof
aluminum alloy
case